Operating between Consett Bus Station and Newcastle Eldon Square given service number X70 / X71 / X72 effective from 25 September 2021. To amend Timetable. During the overnight road closures the following bus stops will not be served (in both directions): X71 Polymer Levelling Base Coat should be mixed with clean water at a rate of approximately 4.5 litres per 25kg bag using a suitable paddle or pan mixer, mix for 2 minutes, allow to stand for 2 minutes then re-mix. This process allows the additives to dissolve and activate. Although not in the specs you should be able to install an E-ATX sized mainboard inside the Core X71.

Operating between Stanley and Newcastle given service number X71 / X72 effective from 29 January 2023. To amend Stopping Places and Timetable. The C57 service towards Galleywood will divert after serving The Beehive bus stop via Dorset Avenue, Duffield Road, Beehive Lane and Skinner's Lane before terminating at Keene Hall bus stop on Watchouse Road. Operating between Consett Bus Station and Newcastle Eldon Square given service number X70 / X71 / X72 effective from 10 January 2022. To amend Timetable. With a height of 677mm, 511mm depth and 250mm width the 12Kg heavy Core X71 just might be the tallest full tower in the market today.Operating between Consett Bus Station and Newcastle Eldon Square Bus Station given service number X70/70/70A/858 effective from 01-Sep-2013. To amend Timetable. Operating between Stanley and Newcastle given service number X71 / X71 / X72 effective from 24 July 2022. To amend Timetable. Operating between Consett Bus Station and Newcastle Eldon Square given service number X70 / X71 / X72 effective from 25 July 2020. To amend Timetable. I was a bit surprised to see that although Thermaltake has equipped the Core X71 with three vertical drive mounts there are only two trays present.

Operating between Consett Bus Station and Newcastle Eldon Square given service number X70 / X71 / X72 effective from 19 February 2022. To amend Timetable. Specification Clauses relating to this product can be found in NBS Section M20 Rendering. BS 5262 Code of Practice for External Rendering and BS 8000-10 must be followed. Operating between Consett Bus Station and Consett Bus Station given service number X70/X71/X72 effective from 25-Oct-2015. To amend Timetable.Leaving out the 8 PCI expansion shields (I’d expect at least 10 with this tower) at the rear we also see a 140mm exhaust fan and two PSU areas (lower vertical and upper horizontal).

The Watchouse Road/Barnard Road, Galleywood junction will be closed for roadworks from 27/11/2023 to 11/12/2023. The road will be closed at all times. Operating between Consett Bus Station and Consett Bus Station given service number X70 / X71 / X72 effective from 02 June 2018. To amend Route and Stopping Places. Operating between Consett Bus Station and Newcastle Eldon Square given service number X70 / X71 / X72 effective from 05 September 2021. To amend Route and Timetable. Operating between Consett Bus Station and Newcastle Eldon Square given service number X70 / X71 / X72 effective from 16 November 2020. To amend Route and Timetable. By removing the 3.5/2.5" drive cage you can mount a 420mm radiator max but if you choose to also remove the 5.25" trays you can even mount a 480mm one.Operating between Consett Bus Station and Consett Bus Station given service number X70 / X71 / X72 effective from 21 May 2017. To amend Route and Timetable. Do not apply to shiny surfaces. Scaffolding must be independently tied to allow for uninterrupted application. Any faults in the structure, particularly those which may lead to moisture penetration, must be rectified. Mask around the areas where material is to be applied. Right beneath the 5.25" trays there's a large gap which can be used to move the 3.5/2.5" drive cage found at the base. I like the dual chamber system some manufacturers use with their towers especially when it includes a separate panel like with the Core X71.

All equipment must be washed with clean water immediately after use. Waste material should not be emptied in the drainage systems. The product must be protected against heavy rain, direct sun or wind in the first 24 hours after application. Sheeting the façade or the scaffold is advised to protect against this. For this particular product if these parameters are not met polymer film damage, wash off, discolouration and potential failure can occur. It is the responsibility of the application contractor to manage and record the weather conditions during application and curing of the product. Operating between Consett Bus Station and Newcastle Eldon Square given service number X70 / X71 / X72 effective from 14 September 2020. To amend Timetable.Operating between Consett Bus Station and Consett Bus Station given service number X70 / X71 / X72 effective from 20 May 2018. To amend Timetable. At the top of the case you can fit either up to three 120/140mm fans (two 200mm fans are also supported) or a single 280mm/360mm radiator (a large magnetic air-filter keeps dust away from the interior).