Channel Islands, Isle of Man, Isle Of Wight, Anglesey, Isles of Scilly, Western Isles, Orkney Islands, Shetland Islands, Northern Ireland & Republic of Ireland, Scottish Highlands and Offshore Islands and also areas north of the Glasgow/Edinburgh line including the following postcode areas: Have you got the same finish throughout your bathroom? You want to add another metal to enhance your space but you’re not doing complete overhaul? Here’s one idea you could try.

Wen, Q., Di, J., Jiang, L., Yu, J. H. & Xu, R. R. Zeolite-coated mesh film for efficient oil-water separation. Chem. Sci. 4, 591–595 (2013). Gold and silver is a great contrast for mixing metals. Mixing gold and silver is going to give the bathroom space a luxurious look. A cool-toned and warm-toned metal together actually balances the space really well. The selective surface wetting properties of surfaces are commonly achieved by controlling the morphology and the surface energy through formation of a hierarchical micro-nanostructure and/or tuning of the surface chemistry 16. To functionalize the surfaces, wet and dry methods, including dip coating, sol–gel, surface etching, electrospinning, lithography, chemical vapor deposition, plasma surface modification and radical polymerization, are reported in the literature 11, 13, 17, 18, 19, 20, 21. Among them, atmospheric-pressure plasma-based methods are of major interest for industrial up-scaling. These methods are operating in open-air, generate few wastes, are easily implementable in continuous processes like roll-to-roll systems, are able to rapidly modify large surfaces in a single step, run at low cost as they do not require the use of expensive vacuum equipment and they have low processing temperature, allowing the modification of heat sensitive materials 22. The highly reactive species present in the plasma enable to directly modify the surface of material or to form functional layers 13, 20, 22. Via simple variation of the plasma gas composition, the surface property of meshes and membranes can easily be controlled. These methods were applied to develop oil–water separation devices relying on single functionalized membranes or meshes: Chen et al . reported a 97.5% oil/water separation efficiency using nylon membranes modified by a mm-size atmospheric pressure helium plasma jet to develop superhydrophilic/underwater-superoleophobic surface for water permeation 20. You et al . successfully demonstrated oil collection using a stainless steel mesh functionalized via atmospheric pressure plasma polymerization to develop oleophilic/superhydrophobic surface 13. An easy way to put different metals together in the bathroom is looking at the different levels in your bathroom. Dividing the space up this way is a good starting point and keeps things simple. Korson, L., Drost-Hansen, W. & Millero, F. J. Viscosity of water at various temperatures. J. Phys. Chem. 73, 34–39 (1969).

Buy Plasterers Buckets & Plasterers Mixing Baths Online

Yang, H. et al. Facile preparation of super-hydrophobic and super-oleophilic silica film on stainless steel mesh via sol-gel process. Appl. Surf. Sci. 256, 4095–4102 (2010). Dunderdale, G. J., Urata, C., Sato, T., England, M. W. & Hozumi, A. Continuous, high-speed, and efficient oil/water separation using meshes with antagonistic wetting properties. ACS Appl. Mater. Interfaces. 7, 18915–18919 (2015). Almeda, R., Hyatt, C. & Buskey, E. J. Ecotoxicology and environmental safety toxicity of dispersant corexit 9500A and crude oil to marine microzooplankton. Ecotoxicol. Environ. Saf. 106, 76–85 (2014).

where F b is the buoyant force of the oil in water, ρ o s the density of the oil, V o is the volume of the oil when intrusion occurs and S is the area of the mesh. Separation efficiency assessment of meshes One metal finish for the bottom which would be the hardware on the vanities. The next level up would be the faucets which would be a different finish. Then the mirror a different finish. Nguyen, D. D., Tai, N. H., Lee, S. B. & Kuo, W. S. Superhydrophobic and superoleophilic properties of graphene-based sponges fabricated using a facile dip coating method. Energy Environ. Sci. 5, 7908–7912 (2012). Liu, D. H. F. & Liptak, B. G. Environmental Engineers’ Handbook 2nd edn. (CRC Press, Boca Raton, 1997). MORE MIXING INTERIOR TRENDS: 5 Amazing Tips On Mixing And Matching Bedroom Furniture Which Finishes should match?Yes mixing metals is more than ok! It just depends on what look you’re after. Mixing metals has been a strong trend in interiors for a while now. Because it does look good! It adds interest, depth and helps get a high end look for your space.

One polished brass finish will look totally different to another polished brass finish. When using the same brass finish, get all your brass fixtures from the same company. You can add in a aged or antiqued brass from a different manufacturer. The important part about mixing metals is the colour and undertone. As well as the finishes. These different factors will help in figuring out the right combination for your bathroom. Metals & Finishes Li, J. et al. Facile fabrication of underwater superoleophobic TiO 2 coated mesh for highly efficient oil/water separation. Colloids Surf. A Physicochem. Eng. Asp. 489, 441–446 (2016).Chen, F. et al. Atmospheric pressure plasma functionalized polymer mesh: An environmentally friendly and efficient tool for oil/water separation. ACS Sustain. Chem. Eng. 4, 6837–6838 (2016). Even if you’re choosing up to three different metals, there should be a more dominant metal. This will be the foundation of your design. Then choose one or two accent metals that will work well with your main metal and finish.

Song, J. et al. Self-driven one-step oil removal from oil spill on water via selective-wettability steel mesh. ACS Appl. Mater. Interfaces. 6, 19858–19865 (2014). The best way to pull off this trend is to have different metals sitting next to each other. If you have a polished chrome faucet for your sink vanity then choose a different finish for the mirror hanging directly behind it.

Cheryan, M. & Rajagopalan, N. Membrane processing of oily streams. Wastewater treatment and waste reduction. J. Membr. Sci. 151, 13–28 (1998). And repeat a finish already used for the light fixtures. Preferably the same finish as the hardware on the vanities. This way all the finishes are repeated but not next to each other. 2. Decorative fixtures