Next, get your roller — start at the top of a section and work across and down. This will help smooth out any drips that might land below where you are painting.

Protecting wood for two years, One Coat goes on easily and is showerproof in as little as one hour (climate dependent), and as One Coat only requires, well, one coat, you can have the whole job done and dusted in next to no time, leaving you to go and do something far more interesting instead. Key specs – Finish: Matt; Volume: 5 litres; Drying time: 5 hours; Coverage: 4m² per litre; Coats required: 1-2; Weather protection: 2 years; Available colours: 4Alternatively, you can use one of the best pressure washers, but you will need to wait for at least 24 hours for the fence to dry before recommencing the paint job. To finish your fence prep, give the fence a rub down with sandpaper to get rid of any rough areas. This is not so important for rough-sawn fence panels, but if you have a smoother timber fence, i.e. a slatted fence, then make sure to rub down for improved adhesion. If your fence panel is still wet when you start painting, the paint won't adhere properly to its surface. This can cause unsightly bubbles, and the paint simply won’t do its job properly. It’s time for the fun part. Let’s get painting! Choose fence paint with a tough and durable formula that has been specially designed to be used on exterior wood. Whether you use a paint brush or paint sprayer is up to you. First, you will need a 4-5 inch brush and maybe a smaller brush, too, for hard-to-reach areas. Make sure you have protective sheets on the floor to catch drips.

There are several options to consider when painting a fence. We take a closer look at each one, its pros and cons, and how best to apply.

Key specs – Finish: Matt; Volume: 5 litres; Drying time: 1 hour; Coverage: 6m² per litre; Coats required: 1; Weather protection: 2 years; Available colours: 6 Next, you’ll want to ensure the surfaces you’re painting are as dry and clean as possible, so clean off any dirt and cobwebs with a good stiff brush. This will make sure you give your fence a solid, even coat, free from gaps where water can soak in. Do I need a specific type of paint brush? Start by painting the hard-to-reach areas and edges with a brush. Work in sections from top to bottom, so you can see where you have painted.

Very few people genuinely relish the opportunity to paint their garden fence, and even fewer want to spend hours on a warm, dry day giving their fence two coats of paint. Fortunately, One Coat Fence Life from Ronseal does exactly what it says on the tin. Painting your garden fence is one of those jobs that’s easy to put off again and again. If you really want to make the best job of it, though, then it pays to take advantage of the brief spell of brighter, warmer days known as British summertime. So, if winter and autumn have taken their toll on your fencing, leaving it looking battered, faded and in need of TLC, then read on and we’ll reveal the best fence paints you can buy.

The best paint for fences to buy in 2023

Both types of product usually contain anti-mould elements and an ingredient that will help waterproof your fence panels, to stop any moisture from getting in and rotting the timber. When Should You Paint Your Fence Panels? If you need to give your metal fencing a much-needed makeover, then Direct to Rust Metal Paint from Hammerite is a hassle-free, time-saving option.

Start by filling your sprayer's container with paint. Switch on your sprayer and start in the top right or left corner. Due to its expert technical knowledge of the technologies and materials available across the industry, Promain has a reputation for outstanding service among its trade and retail customers. Finally, if you have concrete – or non-wood – posts that you don’t want to get paint on, mask off with tape and paper. A simple tip if you have slotted concrete posts is to lift out the panel completely and paint it in a separate prepared area. How to Paint a Fence: A Step-By-Step Guide Another element to consider is that, if you’re covering over a strong colour, this may also dictate whether another coat is required. Again, you’ll know once your fence has dried. Anything else to consider? Available in six natural wood colours, One Coat is formulated for use on new or previously stained rough sawn wood and can be applied using a brush or by spray. A five-litre tin is capable of covering six standard fence panels.European softwoods (e.g., Scots pine, Norway spruce or maritime pine) are sensitive to the elements, so they must be treated regularly. You can use any of the treatments available, depending on your preference.