This means that there is support for OFDMA on both radio bands – it’s not enabled by default, so you will need to enter the Settings and turn this feature on manually. Professional wireless dual band access point with a slim wall plate design that seamlessly blends into any environment. The throughput had a gentle fall at 15 feet, but it did go down quite a bit after going past the 30 feet limit. Omada Software Defined Networking (SDN) platform integrates network devices, including access points, switches and gateways, providing 100% centralized cloud management.

Omada lets you configure settings, monitor the network status and manage clients, all from the convenience of a smart phone or tablet. The TP-Link EAP615-Wall relies on the dual-core 880MHz Mediatek MT7621DAT chip which seems to be a step down from the SoC used by the TP-Link EAP610 and there is also less RAM and storage available. Despite both access points being AX1800-class devices, the TP-Link EAP610 and the EAP615-Wall are built on completely different platforms. It’s a win for the right to repair movement but be aware that you need to know what you’re doing otherwise you can still lose the warranty.In any case, the TP-Link EAP615-Wall still does support Seamless Roaming, so, as long as the client device supports 802.

TP-Link has made the teardown process of the EAP615-Wall very simple since all I had to do is remove the two screws from the bottom and then carefully detach the top cover using a prying tool. Equipped with enterprise chipsets, dedicated antennas, advanced RF functions, auto channel selection, and power adjustment, Omada Wi-Fi 6 and Wi-Fi 5 APs have high concurrency capacities for remarkable performance in high-density environments.inches, there is very little competition but this did come at the cost of a few more degrees F since the case is completely sealed off. Cloud Access: Remote Cloud access and Omada app brings centralized cloud management of the whole network from different sites-all controlled from a single interface anywhere, anytime. But, in terms of ports, the EAP615-Wall is better equipped, sporting not one, but four Ethernet ports, the first two being Gigabit and used for connecting client devices, while the third is PoE Out (yes, also Gigabit). Besides the access point, I connected a cable from the router to the switch and also the server device (which has a 2.