A minimum of 3 months should be left after the installation of a new driveway or patio before sealing to ensure that any efflorescence or staining has had time to dissipate NOTE: You may also use a refrigerant cylinder to push sealant into system while charging if the system is low on refrigerant. Just connect EasySeal Ultimate to service port and inject refrigerant through injector into system while charging. We can only provide a delivery date and are not able to confirm the time delivery will be attempted. Therefore, we ask that somebody is able to accept and sign for your items throughout the started delivery date. specialist cleaning to these Asbestos roofs using our specially designed cleaning unit which removes all moss and lichen, with water filtration system included. After the cleaning process, problem areas can be easily identified Apply a second coat whilst the sandstone remains damp from the first coat. Timing depends on temperatures and the type of stone* (This sealer enhancer is suitable for most types of natural stone).

IKO EasySeal roofing membranes should be installed generally in accordance with BS 8217: 2005, ‘Code of Practice for Reinforced bitumen membranes for roofing’ and IKO fixing instructions. EasySeal roofing is applied as a two-layer system, bonded by the removal of the release film on the reverse of the product, in accordance with the detailed 'Step by Step' fixing instructions available from IKO. Apply EASY Seal BCS with a brush, roller or low pressure sprayer at a rate of 3m2 per litre for the first coat This vapour control layer has been designed for use on habitable buildings, meaning it is compatible with structures that see a lot of residential use. This product is ideal for use on a range of different flat roof projects, with porches, garages and extensions just some of the structures this roof can be used on effectively. Tarmac & Pothole Repair We offer a range of permanent pothole repair & pothole filler materials such as Ultracrete Permanent Pothole Repair, instant tarmac including Ultracrete Instant Road Repair 6 & 10mm, cold joint sealants, line marker paints and anti-skid patch repair. Paving, Pointing & Grouting We offer a range of pointing and grouting materials for jointing your patio slabs, outdoor paving or driveway including flowable slurry grouts such as UltraScape Flowpoint, brush-in grouts like EasyJoint and gun injected mortar for fine pointing. As well as supplying paving primer, sealants and paving and driveway cleaners.

The EasySeal line has proven to be the number one trusted leak sealant brand for years, with millions of leaks sealed. Now Nu-Calgon has made EasySeal even better with EASYSEAL ULTIMATE – the strongest and fastest leak sealant on the market, now with the ability to treat systems up to 10 tons in one application! Please note: Natural stone varies in levels of porosity, therefore on more porous stone or uneven surfaces the coverage will be less and more product will be required. For less porous stone, such as slate and limestone use our EASYSeal Slate and Limestone sealer and enhancer. EASYSeal Sandstone Sealer & Enhancer is for more porous natural stone.

Attach other end of charging hose to low side service port. As this is done, there will be a very small release of system charge that will purge air from the hose.

metres of control layer means you’ll be able to cover plenty of area on your roof with just one roll Located in the North East of England, Easyseal UK are a well established company providing effective solutions to all your industrial roofing & wall-cladding problems, plus asbestos roof renovation. Approved contractors for numerous manufacturers of liquid coating and single ply membrane waterproof systems, Easyseal have carried out projects across the entire United Kingdom. Services we provide include: Incredibly easy to apply to your roof, the installation process can be carried out by DIY enthusiasts and professional builders alike This product is not suitable if surfaces have been treated previously with a silicon or stearate based water repellent

Surfaces should be clean, dry and free from mould, debris, algae and efflorescence before applying to the sandstone Work diagonally across the joints, in straight lines & in one direction, do not allow the material to pool For those who need to install roofing membranes, but want to avoid the hassle and experience requirements that ‘torch-on’ methods such as hot bitumen or use of naked flames usually bring with them, the BBA approved IKOR Easyseal self-adhesive roofing system is absolutely for you. An extremely versatile product guaranteeing an excellent performance on any flat roof it is applied to, this excellent product is made up of a polyester reinforced aluminium core and a bitumen coating.Surfaces must be clean with no visible stains, dirt, debris, algae, moss, mould, fungal growths, waxes or coatings – as well as being free of previously applied finishes otherwise there is a risk they will be permanently sealed in after application. upper surface has a non-removable polyethylene film, with a removable release film to the underside. Both the capsheet and underlay have specially formulated self-adhesive additives in the coating. EASYSeal BCS can be applied to a variety of concrete paving materials on driveways, paths, walkways and patios. Features & Benefits EASYSeal BCS is ideally applied to a dry surface but can be used on lightly damp – not wet or soaked surfaces, must be free from standing or ponded water Briefly open then close high side valve of the manifold gauge set to allow a little high side liquid to flow through the yellow hose and EasySeal Ultimate tube. With high side valve of the manifold gauge set closed, wait one minute for the yellow hose and EasySeal Ultimate to equalize to suction pressure. Disconnect EasySeal Ultimate from suction service port and from manifold gauge set. Discard or recycle empty injector.