Does Ring Video Doorbell (2nd Generation) use cellular data all the time or just when it's activated? Get information on the No-Drill Mount for Ring Video Doorbell 3, 3 Plus, 4 and Battery Video Doorbell Plus. If the wires are too short to reach the doorbell, use the wire extenders with the wire nuts found in Bag D. We have several different versions of the Spare Parts Kits currently on sale. The kits are listed below along with the parts that come in them: Device No. The No-Drill mount cannot be used to mount the Solar Charger for Ring Video Doorbell (2nd Generation).

The No-Drill Mount for Ring Video Doorbell (2nd Generation) is a mounting plate specifically designed for this device. Perfect for renters who can’t drill holes in their homes, with it you can mount your new Ring Video Doorbell (2nd Generation) and never worry about damage to your external walls.

Required Cookies & Technologies

No. This No-Drill Mount is specifically designed for the Ring Video Doorbell (2nd Generation). It will not work with the Ring Video Doorbell (1st Generation) or any other model of Ring Video Doorbell. No. The adhesive tape is designed for one-time use, but the mount comes with one set of additional tapes for re-installation. Pull your home's existing wires through the center of the corner mount before installing on the wall. CAUTION! If you use the wrong screws to secure the faceplate, you could damage the battery during installation, create a fire hazard, and be seriously injured.

CAUTION! Do not drill or drive screws into your home's electrical wiring. 3. Insert the battery and secure the faceplate.

Install your doorbell and connect to an existing chime

Note that you should set up your Ring Video Doorbell in your Ring app before mounting it to your home. For your safety, only use an existing doorbell transformer within the range specified above or DIN Rail Transformer (24Vdc, 420mA) to power your device. Ring Video Doorbell (2nd Generation) is compatible with b/g/n wifi networks operating on 2.4 GHz frequencies. With Ring Video Doorbell (2nd Generation), you’ll always be connected to your home, so you can watch over your property and answer the door from anywhere.

Fully charge the built-in battery by plugging it into a USB power source using the provided orange cable. Insert the included plastic anchors into the holes. You may need to use a hammer to get the anchors in. If installing on a masonry surface, mark 4 screw holes using the doorbell as a guide. Drill pilot holes using a 6mm drill bit. Insert the wall anchors, then drive the short mounting screws through the mounting plate into the wall anchors. I have an unusually shaped front garden. How do I aim Ring Video Doorbell (2nd Generation) in a direction other than straight ahead? If stolen, we will replace it for free. Simply fulfill the reporting requirements, and we’ll ship you a replacement Ring Video Doorbell (2nd Generation).No. The original Ring Video Doorbell will continue to work as normal and will continue to be supported by Ring. CAUTION! Do not drill or drive screws into your home's electrical wiring. 2. Secure the wires to the terminals. Once power is turned off, remove your existing doorbell button from the wall and disconnect the wires. Your Ring doorbell is compatible with doorbell systems supplying 8 to 24 VAC at 50/60Hz, 5VA to 40VA. Ring Video Doorbell (2nd Generation) will only use cellular data when it’s activated by an event, recording an event, or when you access Live View via the Ring app. If the Video Doorbell doesn’t detect motion or isn’t activated with the app, it won’t use your data.

CAUTION! You'll be working with electrical wires during the install process. If you are uncomfortable or inexperienced with doing so, consult with a licensed electrician. 1. Optional: Install the corner mount. CAUTION! Do not drill or drive screws into your home's electrical wiring. 4. Insert the battery and secure the faceplate. For your safety, only use an existing doorbell transformer within the range specified below or compatible Ring accessories to power your device. The No-Drill Mount uses double-sided adhesive to attach the plate to your wall. Your doorbell can then be securely screwed onto the mounting plate.Ring Battery Video Doorbell Plus is compatible with all Ring Video Doorbell 3, 3 Plus and 4 accessories, including: Ring Video Doorbell (2nd Generation) is rated for temperatures ranging from -20 to 48 degrees C. Internet requirements If installing on a masonry surface, mark four screw holes using the doorbell as a guide. Drill pilot holes using a 6mm drill bit. Insert the wall anchors, the drive the short mounting screws through the mounting plate into the wall anchors. There are two types of screws that came with my Ring Video Doorbell (2nd Generation). What is each screw used for? Ring Video Doorbell (2nd Generation) can be adjusted to point in directions other than straight forward through the use of a Wedge or Corner Kit.