Within two minutes, press the Pair button on another powerline adapter for 1 second. Its Power LED starts blinking. When the Powerline LED turns on, the pairing process is complete. Avoid plugging in powerline adapters and high-powered household devices (such as washing machines and refrigerators) close to one another.

Compatibel met alle standaard HomePlug AV en AV2 Powerline-adapters. Dit product is mogelijk niet compatibel met routers of gateways met firmware die is gewijzigd, is gebaseerd op opensourceprogramma's, niet-standaard of verouderd is. Powerline adapters work in pairs. You should have at least two powerline products to build a powerline network. To optimize your network performance, please follow these principles: b .Within two minutes, press the Pair button on the new powerline adapter for 1 second. Its Power LED starts blinking. When the Powerline LED turns on, the pairing process is complete. The tpPLC utility enables you to view and manage your TP-Link powerline network. Its bold and intuitive interface helps you easily configure each powerline device.How to set a new Powerline Network Name to secure your whole Powerline network using the tpPLC Utility on Windows 06-28-2022 116109 How to add an extra powerline adapter to the existing powerline network with pair button 06-29-2022 487166 Make sure the Powerline LEDs are lit on all of your powerline devices. If they are not, pair all powerline devices according to Secure Your Powerline Network by Pairing.

The Power Saving feature takes effect when your appliances are disconnected or turned off. Actual power saving data will vary in different network conditions and environments. Note: If the Powerilne LED is off, refer to What should I do if the Powerline LED is off? for detailed information. Verify that you have an internet connection by connecting your computer directly to the modem or the router.

Open Source Code For Programmers (GPL)

All powerline adapters share some common factory settings, and can communicate with one another. If you want your powerline adapters to communicate only with your own powerline adapters, you should pair them. Thus a secured powerline network is formed and other powerline adapters can no longer join your powerline network without being paired. Plug the other powerline adapter into a wall outlet on the same electrical circuit. Wait until the powerline LED turns on. Tips: We recommend that you plug in your powerline devices near each other, or as close to each other as possible when pairing. Your settings will not be affected. The devices can be relocated to where they are needed once pairing is complete. IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process How to add an extra Powerline adapter to the existing Powerline network by adding the the powerline key on the Utility(Green UI) 06-28-2022 103610