Innokin EZ.Watt Starter Kit Endura t20s Tank and 1500mAh EZ.Watt Mod E Cigarette, Grey

£9.9
FREE Shipping

Innokin EZ.Watt Starter Kit Endura t20s Tank and 1500mAh EZ.Watt Mod E Cigarette, Grey

Innokin EZ.Watt Starter Kit Endura t20s Tank and 1500mAh EZ.Watt Mod E Cigarette, Grey

RRP: £99
Price: £9.9
£9.9 FREE Shipping

In stock

We accept the following payment methods

Description

Please clean up the charging port, try another cord and charging the battery on a wall outletfor 3 hoursto see whether it can charge. Other features like Voltage and Temperature are being adjusted automatically by the Innokin EZ Watt mode. Thus, you don’t have to worry about the resemblance of those settings. No e-juice overheating, no flavor or vapor tradeoff. Stormy Vapor Clouds Made EZ

On infrequent occasions Next Day Delivery can be affected by operational issues with our partners and may arrive later than planned. We cannot be held responsible for operational issues with our partner services, but will operate in line with their policies in such an event Please refer to the data protection section of our terms and conditions for information on how we handle data. This was sent to me direct from Innokin for the purpose of this review and as always my thoughts and opinions are my own. Inside the Box Looking for an amazing deep direct lung hit? Swap on the Slip Stream tank and select 30 or 35 Watts for big clouds and huge intense flavors. The bestselling Slipstream tank features full airflow control, top fill and an advanced top-down coil swap system.

To change the coil – unscrew the base no need to unscrew coil as it’s press fit so pull out and replace. If You Want to Sub Ohm Vape – You’ll Need Another tank The way you choose the power is simple but do keep it between the two lowest settings with the coils in the box. Please try to vape at an appropriately high wattage which is recommended on the coil during vaping. It may encounter thespittingissue if the liquid on the coil hasn't been atomized on time with low wattage. To start vaping the Innokin EZ Watt, you need to screw the preferred coil, as well as the mouthpiece, inside of the tank, then put it tight on the charged battery unit. If you notice any leakage problems, it probably means that the coil doesn’t sit tight enough. The T20-S tank has a top-fill system, so it’s very convenient to refill. A couple of spare O-Rings in the kit I found handy for reducing the probability of e-juice leaking. The beeping noise you hear is totally normal and is a symptom of something called pulse-width modulation, or PWM for short. In simple terms, PWM is how the device utilizes the electrical power from the battery to heat up your coil. These pulses of power can approach the frequency range of human hearing in some individuals with an acute sense of sound. Nothing can be done to avoid this noise, however it's nothing to be concerned about regarding the performance or lifespan of your product.

Flavour wise the tank is very good with my current 50-50 12mg tobacco e-juice tasting crisp with an extremely enjoyable throat hit and decent vapour. Admittedly the Slipstream is a cheap cheerful and pretty solid little tank but please be aware that to sub ohm on the Innokin EZ Watt you will need a different tank 😉 If you’ve just come off the fags then this little beauty is perfect for you as it really is as simple as holding down two buttons to set your wattage. On the outer side of the device, there’s a power button for variable wattage adjusting. It is supported by three LED lights indicators shaped like arrows. Higher you’ll see the firing button with a chrome surface made in a traditional on/off round button style. Both buttons bulge out a bit, so you can easily press them intuitively without looking at it. I found the power button to sit a little tighter than the firing one, but maybe that’s been done on purpose to make you feel the difference in sensation between those two.As you’ve learned from reading this instruction manual, the Innokin Go S is an extremely simple device. There’s no reason why it shouldn’t give you trouble-free service for a very long time. If you do happen to experience a problem with the Innokin Go S, you’ll find the answer right here. Make sure to prime your coil upon first use. 1 drop of e-liquid per cotton juice port is enough. Once primed, allow the coil to stand in a 3/4ths full tank for at least 15 minutes before vaping. There’s obviously x3 modes with each arrow representing the setting starting with the bottom one and moving up: The Innokin EZ.WATT Starter Kit is an unbeatable device in when it comes to starter kits, namely because of the adjustable wattage and option to change vaping styles easily.



  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns

Fruugo

Address: UK
All products: Visit Fruugo Shop