Selbstreinigungsfunktion - Pumpeneinheit und Schlauch reinigen sich in wenigen Minuten selbstständig Your Airless paint sprayer does not immediately give you the desired result. Of course, we are sorry to hear that. But rest assured that you will soon be pleased with the result. In most cases, the problem can be resolved by way of a number of tips, and the most important ones have been set out below. The Flexio 950 is a direct feed sprayer with the ability to draw paint directly from the paint can, allowing you to work faster for longer! It’s handy spray lance gives you extra reach for high walls and ceilings, whilst also reducing the weight (with the paint being fed from the ground up). It has a 3.5m hose, allowing a working radius of 8.5m. The Flexio 950 also features an ‘auto-clean’ setting, which helps to flush out the paint lines when you’re done.

Patented I-SPRAY nozzle for extra-fine atomisation and high viscosity tolerance even when using high-viscosity materials The Standard spray attachment is your all-round attachment for a variety of paints and stains. It can be used both indoors and outdoors, where more control and a smoother finish is desired over the iSpray attachment. What is the Brilliant spray attachment used for? When spraying ceilings, ensure that the paint suction tube (located inside pot of the spray attachment) is facing to the rear of the unit, so that it is collecting paint from the lowest point within the container once tilted. Where can I get parts for my Flexio sprayer? For emulsion and latex paints for interior use and with the included standard spray attachment also for water and solvent-based paints, varnishes, wood preservatives, oils and so much more The Flexio 890 and 950 are stationary sprayers in which the turbine sits on the ground delivering air power through the hose to spray coatings with adjustable control to maximize coverage and minimize overspray. With the turbine sitting on the ground and not in your hand, there is less operator fatigue.

The iSpray attachment, which will spray unthinned coatings including acrylic paint and stains, is ideal for big surface projects such as spraying walls, sheds, fences etc… It will provide a roller-like or slightly stippled finish. What is the Standard spray attachment used for? There are two main paint spraying techniques: Airless and high volume low pressure. Without going into the technical details, the main relevant differences are as follows. Airless Sprayers atomize coatings by forcing the product through a small tip opening at very high fluid pressure. The fluid pressures range from 1200-3600 PSI. Airless sprayers are capable of spraying larger surfaces at higher speeds. Airless sprayers have more overspray than HVLP which is the amount of product that does not adhere to the surface you are spraying. Full of paint, the attachment – used only for lacquer and stains – can weigh between 1-1.2 kg. The Universal Sprayer W 950 draws emulsion paint directly from the container. The Flexio 990 is also a direct feed sprayer, drawing paint directly from the paint can. The turbine is still held in your hand with this model, making it a great compromise betwen the Flexio 590 and 950 when it comes to working speed and portability. Why does air continuously come out when I turn my sprayer on?

The Universal Sprayer W 950 draws paint directly from the paint container, which means you do not have to continually refill a reservoir. This makes it faster to work with the Universal Sprayer 950 than with the Universal Sprayer W 890. One advantage of the Universal Sprayer W 950 is that you do not have to put in much physical effort because the machine draws paint directly from the container and it has an integrated handle extension. Its flexibility is also increased with the optional wood & metal attachment. It may be that you were supplied with a standard Airless nozzle holder on or with your gun extension. HEA (High Efficiency Airless) nozzles have a slightly different size, as a result of which yours may not fit. Instead of the standard Airless nozzle holder, screw your HEA gun nozzle holder onto the gun extension. With this holder, your HEA nozzle should fit instantly. White plug on the return hose broken off If a leakage occurs during use of the device for the first time, it could be that one of the seals is not properly joined. While a manufacturing defect is not a common occurrence, it is possible in this case. The W200, Flexio 950, and Flexio 890 are bleeder guns. With a bleeder gun air flows continuously; the trigger only starts and stops the paint flow. The W890 has a switch on the hand-piece that can turn the airflow on and off as well. What is the iSpray attachment used for? Disconnect both the suction and return hoses, turn the device around, and fill the inlet valve with water. Switch the device to position 2. If the water runs out of the outlet valve, the problem should be solved.The Universal Sprayer W 890 has attachments [reservoirs], including a 1-1.5-litre reservoir, that you fill with paint and attach directly to the nozzle. The weight increases the difficulty of painting a ceiling and the reservoir has to be refilled when it runs out. However, the advantage is that you can easily change colours, and the machine has a much wider range of potential applications as it is easier to use for all kinds of objects and paints. Also, you get less overspray. The Universal Sprayer W 890 is Wagner's most suitable model for small projects. This will depend on which front end is being used, along with the specific coating and temperature conditions.