Due to its expert technical knowledge of the technologies and materials available across the industry, Promain has a reputation for outstanding service among its trade and retail customers. One of the main problems with roller sleeves is that they often loose fibres when they are brand new. These fibres then end up on your wall ruining the finish. A long sleeved mohair roller would be used to cover a textured wall or an artexed ceiling whereas a smooth foam roller would be used to paint emulsion on a nice smooth, plastered wall. The length of the hair on a roller is called the nap or pile of the roller. This will result in the paint peeling and will also be a waste of time and money. It’s crucial to wait for the first coat to dry completely before adding a second one. Doing this will give you the best results and prevent any issues down the line. Skipping the Sealant If you are painting just one room in one colour, then you will only need a singular paint roller to finish the job. If you are using multiple colours, we would recommend you get two roller sleeves as this will mean you do not have to fully clean and dry the sleeve before moving on to the other colour. You will not need to get two roller sleeves as these can be very easily cleaned and dried using a paper towel. Q. How do I stop paint roller splatter?

Paint rollers allow higher quantities of paint to be applied as smoothly as possible to a surfaces, especially when compared to a paint brush. Having the right tools for the job is the first step in any decorating project. Contrary to what many DIY'ers believe, not all decorating supplies are the same and they can't all achieve the same finish. What we always say to DIY'ers is to buy the most expensive decorating tools you can afford, as they offer more durability, will achieve a much better finish and long-term offers much better value for money than a cheap decorating tool that you will use once and bin. Put on safety glasses and gloves to stay safe while working, then use a hammer, screwdriver, or drill to remove nails or screws and replace any broken fence boards. New fence boards should be attached with rust-resistant, exterior-grade nails or screws. Additionally, to make cutting in easier, sometimes it’s better to also cover any exposed edges such as skirting or architrave with masking tape, more can be found here in our project on masking up. Types of Paint Roller Pile (Nap) Whilst you can paint a fence with a roller, you’re more likely to get an even and attractive finish when using either a good quality paint brush or an airless paint sprayer if you have the budget. What’s the problem with using a roller to paint a fence? Consider using a sealant. A good sealant will protect wood fences from fading and peeling and make them more weather-resistant. A suitable sealant will also help your fence look newer for longer!A paint stripper is a tool that can be used to remove old paint from a fence. This is necessary if you’re repainting a fence that’s already been painted. Exterior Wood Preserver Very popular type of paint roller sleeve and a great choice for both DIY’ers and tradesmen alike and are pretty much the go-to solution today. Start cleaning brushes and rollers to ensure the paint comes off easily and wipe down any plastic sheeting, to store it away ready for your next DIY. If you have paint left in the tin, add a label to say when you used it and ensure the lid is clean(ish) and on tight to stop it oxidizing. Store it out of direct sunlight and off the floor. Start by filling your sprayer's container with paint. Switch on your sprayer and start in the top right or left corner. Once you have a clear space around your fence, think about covering the surrounding vegetation (essential if spray painting) and laying down dust sheets or plastic sheeting along the bottom of the fence to catch any paint drips.

Despite the fact you may be tempted to save a few quid and go with the cheap option, don’t! If you are looking for a good finish for your painted surfaces then in most cases you won’t get it with these sleeves. A ladder is necessary for painting fence areas too high to reach from the ground. Be sure to set up stepladders safely and correctly. Have someone hold it steady while you’re on it. Rags Finally, if you have concrete – or non-wood – posts that you don’t want to get paint on, mask off with tape and paper. A simple tip if you have slotted concrete posts is to lift out the panel completely and paint it in a separate prepared area. How to Paint a Fence: A Step-By-Step Guide Paint can get everywhere, so be prepared for a bit of a mess. Cover any nearby surfaces you don’t want to paint on, and wear old clothes that you don’t mind getting dirty. Painting Tools and Materials and Their Uses Extended Pole: Although not actually a roller, but more of an addition. Most roller frames have hollow, or threaded handles. This allows you to insert or screw on an extension pole into the handle to reach high ceilings or the top of tall walls

A peeling and chipped fence paint is an eyesore. It makes your home look neglected. A fresh coat of paint will make your fence look new again and help you maintain that well-kept appearance. It Protects Against the Elements Whilst you’ll more than likely be thinking about the amount of time you’ll be saving by using a roller as opposed to a brush, what you’ve probably not thought of is the fact that there’ll be SO much touching up to do. Are you on the fence about painting your fence? Here are a few advantages to consider: It’s Cost-Effective