Looking inside the machine, you can see that AnyCubic has carefully looked at the robustness of the design with dual linear rails and solid lead screw to help reduce the risk of layer shift. Compared to a sand-blasted build platform, the laser-engraved build platform of the Photon Mono X 6Ks has better flatness and adhesion of the print models. Consequently, the possibility of detachment of the model is reduced and the printing success rate is improved!

However, there are a few notes to the prints. Firstly supports are key to the success of your prints, so spending time ensuring that there are enough of them and that they're all in the right place is essential. The Anycubic Photon Mono X 6Ks is a resin printer in a class of its own! In addition to a 9.1 inch 6K display and a large build volume of 195.84 x 122.4 x 200 mm, the printer impresses with its advanced and precise operation.

The UV power of the machine is high. If there are solid reside in the resin vat or on the printing platform frequently, please decrease the UV power and increase the normal exposure time. Using UV to expose prints is a technical process, and any fluctuations in temperature can affect the success of the print. Within the machines base is a complex cooling system to help regulate the machine and extend its usable life. Returning items claimed to have defects but found by Anycubic quality control to be in working condition

The UV power of a 3D printer is the intensity of the ultraviolet (UV) light source used to cure the resin during the printing process, and it is a measure of the energy delivered per unit area of resin. UV power is measured in watts per square centimeter (W/cm²) and determines the rate at which the resin cures. Higher UV power cures the resin faster and correspondingly faster print speeds. Different UV power levels will have an impact on the quality and efficiency of the print. Adjusting the UV power according to the needs is one of the practical printing skills. Overall the print quality is exceptional, and comparing a print from this against an FFF 3D Printer and the print quality difference is easy to see. Layer markings are far less defined, and you can print much more complex models. During resin 3D printing process, the UV light emits ultraviolet rays, which irradiate the resin surface through the resin tank to complete the curing of the resin. The power of the UV light is an important parameter to consider, it can be adjusted when using a 3D printer. Changing the UV power will affect the quality of the print, higher UV power also means the resin will cure faster. In this tutorial, we will introduce the testing and adjustment of UV power for Anycubic Photon Mono X 6K. Understanding the UV power of 3D printers will help you get better printing results. Adjusting the UV power for different types of resins can help ensure the material cures properly and get high quality 3D prints. AnyCubic has come up with a simple lift on and off solution, it's not the most elegant solution that I've seen, but there's no faulting its effectiveness.With a print volume of 4.76 litres and a build space of 195.84 x 122.4 x 200 mm, you can afford to print larger models as well as perform multiple prints in one pass. Increased efficiency is guaranteed! Software for 3D printers is essential to the success of the print, and here AnyCubic has designed a relatively simple and easy to understand solution. The Photon Mono X 6Ks is equipped with a 9.1-inch HD monochrome display with a resolution of up to 5760 x 3600 pixels. With a contrast ratio of 380:1, sharp and finer details can be displayed. Failure to return the product to Anycubic within 7 business days after the replacement has been confirmed by Anycubic.