DTL vaping uses devices with high wattage to pump power into the coil. This process is able to produce a lot more vapour. However, the side effect is that it creates extra heat. To cool this down, DTL vaping uses lots of air. K1 Quadruple coil has a resistance of 0.2ohm and performs best, between 80-130 watts. This coil has balanced heating, which produces denser clouds with increased flavour. In short, DTL vaping uses lower resistance coils to produce more vapour. The coils allow more current to be run through the atomizer, creating more heat and, as a result, more vapour. Restricted Direct-to-Lung: A1 Single Mesh coil has a resistance of 0.17ohm and performs best, between 90-140 watts. The A1 has a faster heating process which increases flavour production.

We recommend you do not use an e-liquid that has higher than a 6mg nicotine strength, this will be too harsh on the throat. Sub ohm vaping produces more vapour and because of this, an increased throat hit. High VG e-liquids will allow you to experience greater vapour production when used with this kit.

This delivery option is not available for customers in Guernsey, Jersey, Northern Ireland, Scottish Highlands or Aberdeenshire. International S2 Quadruple coil has a resistance of 0.15ohm and performs best, between 30-70 watts which provides a denser cloud production with increased flavour. If you’d like to read more about the different vaping styles and their pros and cons, try these articles: The Smok Mini V2 Coils have been designed for use with the Smok TFV-Mini V2 Tank. Designed for sub ohm vaping there's a variety of versions of this Smok replacement coil. Due to the sub ohm resistances, we recommend using high VG eliquids of 60% and above for best performance.

DTL, MTL, and RDL vaping styles require different coils. You can roughly split this up as being either sub-ohm or 1-ohm and above. DTL vaping uses coils of around 0.6-ohms and below, while RDL is in the 0.5 – 0.8-ohm range. MTL, on the other hand, uses 0.8-ohm or above. The options as you can see are plenty, but there is only one coil that stands out, and is the TFV8 V8 Baby Mesh Coils - 0.15 ohm . The flavour and cloud production are at the peak for this and compatible tanks, when using this coil due to the Mesh coil feature that other coils form the range do not have. The Smok A coil range feature mesh coil builds, with a coil resistance of either 0.17 Ohm, 0.2 Ohm or 0.15 Ohm, and are available in a range of colours for a real statement piece.In the case you are on Nic Salt, you can go for the Nord 0.8 ohm Mesh MTL Coils , as they are the best one due to the mesh coils. If you are on pure base nicotine, then you have a few options based on what you are after. If you like a smooth hit, then you should go for the Nord 0.8 ohm DC MTL Coils , but instead if you like a strong throat hit from your device, then i'd suggest trying the Nord 1.4 Ceramic Coils , or using the Nord 1.4 ohm Coils that have been included in the box with yoru Smok Nord Device. Which Smok Nord coils are best for Direct To Lung?

Then when we get to the RGC Pod, the only option currently available is the RGC 0.17 Ohm Mesh Coil . Yes, currently it is the only one available, but it's also the best coil overall that you can use with any of the RPM80 devices, due to the massive cloud production, and not to mention the impressive flavour that provides when using High VG E-Liquids. This is the tank that came out with Smok’s new generation of vape kit devices which are the Smok Species, Morph, Kiss, D-Barrel, S-Barrel, Mag Grip, Mag P3 and the Smok 80W kit. Please see below which coils are available for these devices: Due to the sub-ohm coil resistances, we recommend using with liquids of 60% and above for best results. Due to the larger amounts of vapour that is created, we advise that you do not use an e-liquid that has higher than a 6mg nicotine strength. NEVER FORGET TO PRIME YOUR SMOK Mini V2 S2 Coils – SMOK TFV8 Baby V2 Coils !The SMOK Vape Pen V2, builds upon the extremely popular Vape Pen 22 AIO device. This new and upgraded device features a 1600mAh battery and now offers up to 60W power output. Operating of a mechanical mode, the wattage output is delivered based on remaining battery capacity. A sub-ohm device, the Vape Pen V2 utilises a 0.15ohm meshed coil and a 0.6ohm dual coil both for use with high VG e-liquids. The SMOK Vape Pen V2 is also compatible with the original SMOK vape pen coils. RDL is slowly becoming a more popular vaping style. It’s like DTL, but it reduces the amount of air that you mix in with your vape. The Smok Baby Beast tank has been around for quite some time now, but it has not ceased yet due to being so popular. There are many coils available for this tank and other compatible tanks, let’s see them below:

Then when getting into the RPM Pod, here we will find more options, but the best in delivering both flavour and cloud production, is the RPM 0.4 ohm Mesh Coils , which is also included in all the devices box. If you tried it and wanted to see all options, then you should go for the Triple 0.6 ohm Coils . All coils available are compatible with Sub-Ohm vaping. The main 2 coils I would like to mention are the Mini V2 A1 Mesh Coils , which is probably the most reliable if you like to vape at higher wattages (40-100W), and are best used between 60 to 80W. Otherwise, if you prefer more of a standard 40W vaping power, I would recommend the V2 S1 Mesh Coils , which are best used between 50 to 70W.

Leave a comment

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly. The Smok Prince has been quite popular in the past years among the market, therefore i decided to cover them too, as the users are still out there. Please see all the available Prince coils below: However, other SMOK devices are compatible with SMOK coils that come in different ranges to facilitate DTL or MTL vaping. As more devices come to the market that allow DTL, MTL, or RDL, it’s the coils that make this versatility possible.