Manual Configure Mode (This mode requires your phone has connected to a 2.4GHz WiFi or has connected to a 2.4GHz&5GHz combined WiFi network) DC5V~24V wide range of working voltage, but it cannot regulate the output voltage. That means the output voltage of power supply must be the same as the work voltage of your LED lights. The current through the amplifier is limited, when the current consumed is high, you need to add the power supply of the corresponding voltage. The SP801E LED Controller with 4 output ports, each port supports 1024PCS ICs, so the totally supported number of ICs up to 4096PCS, not only supports the main types of ICs on the market but also supports multiple Art-Net software, supports regular rectangle layout setting and importing DXF files. built-in multiple types of effect layers, text layer, music effect layer, etc. the effect layers support a variety of custom parameters: direction, width, color, length, shape, etc. with the real-time preview function, you will know how it looks like before run on the LED Lights. so it can work with LED Strips, LED Matrix, LED Panels, etc. To flash firmware to the controller, you can use any ESP programmer module or other UART Serial adapter with 3,3V. Connect RX, TX, GND and VCC (3.3V!) between the programmer/power source and the ESP chip. To flash an ESP, you also have to connect GPIO0 to GND at boot time to enable the programming mode instead of starting the flashed firmware. See the corresponding pins at the image provided above.

Capture the image’s color you like: The WiFi controller features a creative from-image-to-effect function. It can capture the color of the image, create the distinctive color effect and synchronize light color with the atmosphere of your room. This SPI signal amplifier is compatible with all kinds of 5V-TTL signal dual signals. It receives one signal and simultaneously output 4 or 8 channels of signals. Each channel can control the same quantity of LED pixels as main controller. You can find this controller for very cheap here: https://www.aliexpress.com/item/4000773623427.html?spm=a2g0o.productlist.0.0.4f09329cJ7C1H4&algo_pvid=542e757b-587f-4540-8652-2195883f1349&algo_expid=542e757b-587f-4540-8652-2195883f1349-0&btsid=0bb0622a16012309671478585ed4bd&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_Multiple signal amplifiers can be cascaded together synchronously. Particularly suitable for small and medium dream color lighting projects. It can work with K-1000C, SP105E, SP108E, SP107E, CSY08, CSY07, Raspberry pi, Arduino X2 music controller. Make sure your phone Bluetooth is on and open the APP, select device name "SP110E" to connect the controller.

File “/usr/src/homeassistant/homeassistant/helpers/entity_platform.py”, line 558, in _async_add_entity

User-friendly design: MAX 2048 pixels (Recommend 1500Pixels)in total. Save user settings when power off. DC 5V/DC12V/24V wide working voltage; reverse connection protection; hot-swap protection The controller cannot regulate the output voltage at the VCC. That means the output voltage of your power supply must be the same as the work voltage of your LED lights. If your lights need 5V input, please use a 5V power supply, don’t use higher than 5V power supply

No ‘version’ key in the manifest file for custom integration ‘sp108e_ws2815’. As of Home Assistant 2021.6, this integration will no longer be loaded. Please report this to the maintainer of ‘sp108e_ws2815’ File “/usr/src/homeassistant/homeassistant/helpers/entity_platform.py”, line 364, in async_add_entities

Technical document 1. Command All command send to SP110E has 4 bytes, 3 bytes is data and last byte is command. User-friendly Design: Support setting pixels number, control up to 1024 pixels in total. Save user setting when power off; Reverse connection protection; Small and convenient, the light effect is vivid and beautiful. Controller: High-level SP110E asynchronous controller. Use it only in asynchronous environment (with asyncio)