Depending on the materials will be obtained different adhesions, so we advise before printing large parts with certain technical materials are pre-tested. ensures that the first layer of each 3D print adheres securely to the build plate surface, making sure the print starts well and stays in position. Then, only some water is needed to easily clean your printing surface and your 3D printer is ready for your next printing.

We started printing right back in 2014 and have tried every trick in the book when it comes to bed adhesion. For this reason, we use cookies and third-party services to improve the services we offer, display relevant advertisments and receive usage statistics.We’ve harnessed innovation and technology to create a one-of-a-kind solution that enhances the quality and precision of your nylon prints. Printer Adhesive spray is the perfect substitute for Kapton tape, blue tape and other types of adhesives. A simple light spray on a smooth surface is enough to ensure that the first layer of plastic remains completely fixed to the base.

is the perfect substitute for Kapton tape and other types of fixers due to cost-saving and its easy application. At that moment, the Kapton tape was the only product to fix the first layer to the 3D printers’ surface but its application was complex and required in some cases, especially for larger surfaces, an extreme amount of patience to apply!

The special formula of the 3DLac Stick facilitates the removal of the part but it should be done very carefully nonetheless. There are many reasons for adhesion problems, also depending on the filament used, and as many solutions, from adjusting the bed and ambient temperatures, choosing certain slicing software settings, or using tapes and special build surfaces to applying sprays (such as 3DLac Spray) or adhesion liquids, such as the 3DLac Stick. The printing base should be allowed to cool down (at least to 30 ºC) before the part is removed from the printing bed.