Oily hardwoods such as teak, resinous areas and knots should be thoroughly washed with white spirit When applying a French polish, Shellac sealer or varnish, be careful as over brushing may remove the stain. Always do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer’s instructions on the tin at all times. of the reach of children. Keep away from sources if ignition – No smoking. Do not empty into drains.

This is not intended to be a full statement of your rights under the Consumer Contracts Regulations. Full details of your rights are available from your Local Authority’s Trading Standards Office. How To Return A Product However, we then like to go a little deeper to explore more detail about the product by looking at products in the same category as Colron Refined Georgian medium oak Matt Beeswax 0.4L. That then tells us that there are 4480 products in the Painting & Decorating category at B & Q. Shake the wood dye tin very well before use and ensure you have enough stain to finish the entire job before starting or it may dry patchy. If more than one tin of dye is required to complete the work, mix the tins together to ensure a consistent colour. Wood knots and other resinous areas should be wiped with Methylated Spirit to remove any surface resin Please note that during particularly busy periods, it may take a little longer to receive your delivery and our carrier may attempt to deliver to you on a Saturday.With so many factors to take into account when choosing a colour for a wood finishing project, our advice is to always do a test area first on the actual wood to be stained and finished. If you find that the colour is either too light or too dark on the test patch, there are probably things that can be done to fine-tune the final colour. For example, a water-based stain can be diluted with water to lighten the shade. This is by far better than completing a major project to then be faced with the prospect of having to sand it all off and start again. Need more help with Oak? Need help with your oak project?

If you wish to return your item to Robert Dyas, you can do so by one of the following methods: 1. Request a Collection via Robert Dyas Customer Services Anything of a nature that for hygiene or associated health and safety - this includes the Outdoor Spas, Mattresses and Divan Sets Ensure that all previous paints and varnishes are fully removed by sanding or with a suitable varnish and paint stripper, before oiling We do have a really good product from Sikkens that you could take a look at Sikkens Cetol TSI Satin Plus which can be applied over existing finishes if a test area proves positive and has 5 colour options in the range or alternatively the Ronseal Diamond Hard Interior Coloured Varnish Satin which has slight more colour options with 12 available. Red is a strong colour to have to bring down in tone and you can often end up with a more pink or orange appearance if you are not careful. And if can be difficult to know what the right solution is for this, it could just be a case of test areas to see what the results are.So what is the best approach when looking to colour wood with a coloured or pigmented wood finishing product? In short, trust your eyes and go with the colour that looks right rather than by the name of a colour. Always keep in mind that the colour of the product on your floor or furniture will likely differ to the example colour swatch on the tin. Another thing to take into account is that when viewing wood finishing and indeed paint colours online, everyone’s monitor is set to a different contrast and colour setting similar to when you see the same TV programme on many TV’s when you walk into a TV shop. Old coatings of paint or varnish must be fully removed by sanding or with a suitable paint and varnish remover Our first average we look at for Colron Refined Georgian medium oak Matt Beeswax 0.4L is to judge it against other products from the same brand, in this case it’s Colron. This tells us that there are a total of 53 Colron products at B & Q. So if you take a look at the Fiddes Hard Wax Oil Tints or Blanchon Hard Wax Oil Tints there may be a colour with in this range that could be close. You are also able to intermix with in the same range to create a new colour, very, very thorough stiorring is required and the sample tins are the best way to experiment with this option.