The minimum water pressure for operating a Sanicompact is 1.7 bars. If your water pressure is lower than this, we recommend you install a traditional toilet bowl, behind which you can install an adaptable macerator like the Saniflo Up, Sanipro Up, etc. How do I install a Sanishower +?

One thing they all have in common though, is quality. As well as the classic Saniflo models, we always try to incorporate efficiency and new aesthetics, wherever possible: One of the great advantages of Saniflo macerators and pumps is being able to discharge at a very small diameter (22-32 mm for the vast majority of products, with some large pumps like the Sanicubic or the Sanifos line using DN50 and DN100), thereby avoiding major remodelling. Got the product on time, got it installed and it works much better than its predecessor. Hopefully it will last a long time as well. The product, as usual from Saniflo, is great. The side entry for the W/C enables slimline fit within a stud wall (access hatch fitted) and it's very quiet-considering its pumping waste about 30m!! Basin and shower connected and it can more than handle the load.This unit has been designed with a vent connection on the lid. All plumbing codes require connection to a vent system. Please note that the vent system should be a two-way air vent. The use of mechanical vents, air admittance valves or similar devices are not permitted as these are considered one-way air vent systems. However, as a major player in the industry, we recognise that our social and ecological responsibility is important and we proudly display our colours in this by compliance with ISO9001 and ISO1001 standards. The flush discharge generally triggers 2 to 3 cycles lasting 1 to 2 seconds each. If your device runs for longer periods than previously, it may be that the rubber membrane system of your device requires cleaning/descaling. You can also use white vinegar or preferably, Saniflo descaler to do this: disconnect your fixture from the power supply, then pour 2 litres of product in the bowl of your toilet. Leave it to work for a few hours and then reconnect to the power supply and flush. Is a Saniflo noisy? To save time and money and be sure that you get the desired result, it is important to make essential decisions before the project starts. Your best guarantee for a smooth project is to use a trusted brand that offers excellent product quality and reliable customer service.

In addition, the macerator/pump's discharge pipe must be connected directly to the main waste water pipe (large diameter). What maintenance does the Saniflo macerator require? It features new easy access to both the tank and the electrical connections thanks to removable lids that offer easy maintenance. It also boasts a new extra slim design.We offer an enormous selection of macerator pumps, lifting stations and combined sanitaryware units, all of which are manufactured to work with small bore pipework that is simple to connect and run to the closest soil outlet. You'll see they're low noise and inconspicuous in operation and with numerous slim line models; simple to hide away. Amazingly, this is quieter than the cistern refilling. I have hidden it in a built in wardrobe through a wall but the fear of it being loud is unfounded. It comes with excellent instructions and a multitude of fitments, it's a great bit of kit allowing us to create an ensuite with shower, sink and loo all connected to the unit and pumping the waste into the main drains around the side of the building without major ground work. It is also highly recommended for the macerator/pump to be connected to a Ground Fault Interrupter (GFI) circuit.