I confirmed that the cable is definitely made of tin plated copper and not Copper Clad Aluminum (CCA) (Tested with a lighter, which melted off the tin to reveal the copper underneath a single strand.

Quote from: 3roomlab on August 14, 2015, 12:50:33 am i bought a test length 18AWG silicone multistranded quite a few months back. Modern car audio has evolved to use a far more diverse range of high frequency drivers than it used to.It is recommended that repair work be carried out in the presence of a second person trained to perform first aid if necessary. Before connecting the equipment to the power supply, check that the available mains voltage corresponds to the voltage value of the equipment.

i tried using my expensive hirschmann clips to get a stable reading, but i think maybe im not too experienced at using it with a 6. I have never been a cable whore and bought/made interconnects, speaker cable based on the type of cable, resistance etc.Unless you have a GOOD crimped lug or soldered the strands together how are you ensuring that each strand is carrying it's equal share of current?

But, if you have poor contact from you clip and between strands then you will get inconsistent results.cheap cable as per amirm's measurements (assuming he made GOOD contact to each strand at both ends of the cables under test). Most purchases from business sellers are protected by the Consumer Contract Regulations 2013 which give you the right to cancel the purchase within 14 days after the day you receive the item. Now we have a wide and outstanding selection from simple lightweight entry level models to SPL competition monsters that have won at important competitions all over Europe. Can be used continuously at temperatures up to 200 °C (392 °F) Resistant to many solvents / lubricants / chemicals etc. Outstanding balance which reflects all unpaid changes due at this time per your selected payment method.

Allow the unit to stabilize at room temperature before taking measurements (important for accurate measurement). To build a system that keeps up with modern subwoofers it is useful to have access to an extensive range of drivers at different sizes and impedance levels.

As to audio applications - maybe for some high power systems it makes a discernable difference, but even there I would select an 8 gauge wire of random copper over a 12 gauge one made of gold plated oxygen free copper.