Colourless does not give U V protections, do not treat timbers exposed to the weather with colourless) Impra Profilan is ideal as a finishing coat on Profilan Fina, available in 9 colours plus colourless- Limba, Light Oak, Antique Oak, Pine, Chestnut, Light Walnut, Walnut, Mahogany, Rosewood and Colourless Ready to use ~ Water-based ~ Solvent Free ~ Odour Free Ideal for furniture, doors, windows, floors, sheds, fences & more! For Interior & Exterior Use

Advice: 2 coats are recommended with further coats increasing the solidity of the colour. Wood Stain + Protect is a wood stain coating so will wear off over time. If applying Wood Stain + Protect to a garden building that will be subjected to high levels of exposure to weather, it is recommended that you apply Protek Clear Tough Coat as a top coat. Color can be used as a stand alone product on new or old bare clean timbers, will require 3-4 coats to produce a surface build for good protection or can be used as a base coat,1 coat followed by 1-2 coats of Impra Elan (top coat) or Impra Profilan top coat. The superior formulation of this product allows it to be applied to terracotta pots and masonry (will adhere to any material that is porous). For interior and exterior use on windows, doors conservatories and other structural timber, suitable for all soft woods and hardwoods which have to retain their dimensional stability. This top quality garden paint waterproofs, nourishes and protects all types of external timber, providing your garden with all year round colour and protection.Our Village Green concentrate is probably the most versatile wood stain on the market. The dilution ratio of the concentrate can be varied to suit your project. Higher concentrations give a vivid colour finish while lower concentrations make it a very cost-effective, high-coverage product. AG Woodcare offline opening times Please note - Colourless does not give UV protection however it can be used on previously stained timbers to maintain the existing colour) If using our wood stain on exterior vertical timber surfaces, we would recommend using Osmo's UV Protection Oil Clearas a top coat for increased longevity*** Our Green Wood Stain is a soft and mellow green, it was inspired by the much loved British Tree. A beautiful colour on its own or it can be used as a detail wood stain to compliment Spruce or to be partnered with Silver Fir. Impra Elan produces a satin-gloss high build translucent finish enhancing the natural grain of the wood giving it a decorative long lasting finish.

Possibly the most versatile wood stain on the market, you can vary the dilution ratio of this concentrate to suit. 1 part concentrate to 9 parts water will give you a very high coverage rate from 1 bottle, making this an incredibly economical product, whereas 1 part concentrate to 4 parts water will achieve a richer, longer lasting finish. Impra Elan is a fast drying spirit based top coat for application on timbers treated with Impra Color (base coat) for long term protection against the harsh effects of UV light and weather influence, provides a micro-porous water repellent film which helps maintain the stability of the timber Wood Protector Willow wood stain brings the soft hues of the countryside to any garden building, trellis and fencing. Relaunched with a larger range of colours, our concentrate range now shares the same colour names as our ready to use range. The old colours are still available, they just have different names. See the chart below for the colour key to find your new colour name. FINISH: Allow 24-48 hours for the stain to fully dry before applying a finish. You can finish your stained wood using a wax, oil, varnish or lacquer.Although our stains are always thoroughly tested for colour consistency, the perceived colour of the stain once applied may vary depending on the qualities of the wood you are applying it to and the method of application. Viewing colours via screen will also alter the perceived colour of a colour swatch. For this reason we always recommend to try a 50ml sample bottle from our ready to use range prior to purchasing a larger quantity. Although our stains are always thoroughly tested for colour consistency, the perceived colour of the stain once applied may vary depending on the qualities of the wood you are applying it to and the method of application. Viewing colours via screen will also alter the perceived colour of a colour swatch. For this reason, we always recommend to try a 50ml sample bottle from our ready to use range prior to purchasing a larger quantity. Available: 10 colours plus colourless - limba, Light Oak, Antique Oak, Mahogany, Walnut, Light Walnut, Chestnut, Rosewood, Pine, Fen Green and Colourless. Ideal for long term protection of windows, doors, conservatories, fascias, and all other interior and exterior timber structures which needs to maintain its dimensions.