If your appliance has not been used for several months, the pump may have difficulty restarting the water flow. To be noticed that water hardness is the first reason of machine calcification and so it is recommended to descale the machine frequently (every 3months or less according to water hardness). Could I leave the used capsule in the machine or should I immediately discard it? It is necessary to purge the machine before its first use. To do this, select on the head the maximum amount of water from the machine, drop an empty container under the head of the machine and press the Cold Water position (blue button) and wait for the end of the stream. Repeat the process on the hot water position (red button). Your machine is then ready for use. When you start your machine and during the rise in water temperature, the on/off button flashes red for about 30 seconds.

The quality of the final beverage is not impacted and can be consumed. Before preparing the next cup, clean and dry the capsule holder, particularly the beverage outlet opening. Once I finish beverage preparation and stop the machine, there is still continuous dripping of product into the cup. Choose the appropriate water level (the amount of water is specified on each adapted beverage capsule). What impressed me about this machine was its speed. In addition to a fast heat-up time, the latte was ready in less than 1min30secs, with the milk pod taking 40secs, and the espresso one about 27secs with the boost function activated. Meanwhile, an americano took 50secs and an XL version only 1min5secs. Your appliance contains valuable materials which can be recovered or recycled. Leave it at a local civic waste collection point. I've just opened my new appliance and I think there is a part missing. What should I do?Follow the instructions in your personal instruction manual for descaling your machine as techniques vary according to the model you own. To my taste, an espresso boost was necessary for both espresso shots on their own and as part of drinks, such as latte macchiato. (The espresso pods could be a little more flavoursome.) At the end of the preparation of the drink, the on/off button flashes red for about 5 seconds. Do not remove the capsule holder during this time! This can prevent clogging in the water outlet and hygiene issues. How often should I descale my machine?

Once beverage preparation is complete and the power button stopped blinking red (about 5s), remove and discard the capsule. Don't keep it in the capsule holder. Can I put milk in water tank? Of course, with Nespresso, Tassimo, Lavazza and Dolce Gusto all offering accessibly priced and ostensibly similar pod machines, it can be hard to sort the wheat from the coffee chaff and find the machine that best suits your needs, so it pays to do your research before you commit to buy – but the DeLonghi Nescafe dolce gusto genio s is a good place to start. If after this, there is still no flow, machine must be sent to a repair centre. Why does the capsule holder leak on the side? Above the green bars, you’ll find the cup icon that will activate the extraction process. Below that, a “shower” icon will light up when descaling is due. This can then be used to activate the descaling mode.

Performance

We put the genio s through its paces to help you decide if it’s right for you – here’s our honest verdict. Select the cold channel, lift and put down the water tank several times and then fix it, flow should start. If not, the needle is probably clogged. For more details about the LEDs on your machine, please refer to the user manual of the machine. Can I use a machine in countries with different voltages? The capsules are designed to deliver an even distribution of water and pressure over the coffee to ensure that flavour is maximized. This system uses pressure similar to that of professional machines.