Engine Ice is there to ensure your sled has all the power and reliability to give you the best experience on your adventure. Before adding coolant your cooling system must be clean and have no chemicals of any kind left in the coolant loop. Not much of a comfort to a stranded rider with a busted radiator, but the animals appreciate the effort. Hopefully, you never loose your coolant, but this seems to complicate the repair/replacement process.

Water Wetter isn't going to make a difference unless you are already maxing out your cooling system and your thermostat is fully open. Due to X1 being a reformulated vegetable extract the colour of the coolant can vary from clear to straw yellow in colour.

I added just enough to the overflow reservoir to bring the level from just below the low mark, to the full mark. The freezing point changes by adding antifreeze and coolant to the water, and it no longer will freeze to solid ice. I do not see how it could hurt but I just thought I would ask the org before I put it in next weekend any advice would be appreciated! With the new liquid surface tension optimizer added to the formula, P1000 Pastel Coolant Series has minimized the risk of airlock and made filling up your system easy! To avoid cross-contamination of incompatible fluids, drain the system, flush your cooling system with a 50/50 distilled water/white vinegar solution or relevant Flush and Clean product, follow up with a distilled water flush, and then refill with the appropriate Engine Ice product.

Color maybe used only to say "Hey I make the blue stuff", however mixing normal Flouro Green and Orange Dexcool can lead to a chemical reaction which turns the Glycol into a gel form and thus clogging the cooling system. When a coolant claims not to boil-over, they signify that the water vapors do not escape the system.

The escaping steam in a boil-over scenario can be viewed as a warning sign that your vehicle will begin seeing catastrophic damage if you do not take corrective actions. The Tt LCS certification was created so that we at Thermaltake can designate to all power users which chassis have been tested to be best compatible with extreme liquid cooling configurations to ensure you get the best performance from the best features and fitment. So, I looked up Motorex Coolant M3 and it is free of "silicates, nitrates, amines and phosphates (OAT technology). In your case you wish to change colors so you need to empty the content of the overflow bottle manually.

Reduces operating race temperatures and effectively keeps boil over temperatures to 256°F or less and freeze-up protection down to -26° F.Thanks to the TT exclusive formula, the old days of repeatedly unplugging the system or waiting for 12 to 24 hours for the air to clear out after filling the loop is behind us.

It's a jet that controls amount of oil lubing the center of the transmission from the main engine oil galley.It did yesterday when I got home from a pretty hard ride, not sure if it had been boiling over the whole time or just when I got home and let it idle for a second while I opened my gate. The new formula also provides P1000 Pastel Series with color saturation and stability, as well as low viscosity that enables effective flow.