The Hyte Y60 is a very quiet case. That can be attributed to the location of the bottom fans, since they’re shoved in the case’s basement, and likely also the glass panels dampening internal noise. I measured the rear exhaust fan using our laser tachometer and it read 1,444 RPM, which is fairly close to the rated 1,500 RPM. Thermal Results for the Hyte Y60 The featured fans are Flow FE12 fans, that can operate at speeds of 1300RPM whilst at whisper-quiet noise levels. Thanks to their fluid dynamic bearing, these fans are highly durable with a long lifespan. Two are mounted on the bottom panel and the third is on the rear. It’s always great to see a new manufacturer enter the PC gaming market. New companies can often bring fresh ideas to the table, unorthodox new designs that can push the industry in a new direction or place a sharp focus on the downsides of many existing products.

You cannot put a GPU directly into the motherboard, or most full size cards for that matter. You MUST use the PCI extender, and there is only room for one. Sound cards, RAID cards, forget about it. Unlike most modern PC cases, the Hyte Y60 is designed with vertically mounted graphics cards in mind. This design decision limits the size of most of this case’s PCIe slots, giving the Y60 a single full high PCIe mounting location (3-slots vertical), and six half-height PCIe slots. With their new Y60 chassis, Hyte has focused on delivering a PC enclosure that looks like nothing else on the market today. While some of our readers have already called this case the “Fish Tank”, many others have praised its wrap-around features. The lines of the case’s fan filters neatly wrap around the whole of the Y60, and its tempered glass panels deliver a neat wrap around look that other cases do not offer. This case is beyond what I was expecting. Finally got away from the over crowded 011D scene. The Y60 is such a great case for the value. I modified this case a bit. I removed the rear fan grill and put in a EKWB FLT120 Pump/Res. Fits perfect. I also swapped the lower 120's for two Noctua 140s.

Exclude a term

count not V-mount a card if you are using a z690 Apex with the Dimm.2 and a 3090 Kingpin with the LCD on. The Y60 clears up this issue

My only comment on all of that, is that if they just made the case ever so slightly bigger, without still having to be a massively heavy full size tower, it would have allowed for a lot more options. The Hyte Y60 isn’t huge, at 17.9 x 11.2 x 18.2 inches (456 x 285 x 462mm). But while Hyte claims this case can fit SSR-CEB/EEB (E-ATX) motherboards, our standard-ATX Gigabyte Aorus Z690 Ultra was already a fairly tight fit. Based on product pictures, this case was designed more in mind of full-system liquid cooling setups, I hope to eventually have a build like that to put it to use in that way. I do see this as a case I will keep for multiple future builds to come.

Hyte Y60

Hyte was more generous on the GPU side in terms of clearance. This case fits cards up to 14.76 inches (375mm), which means your Asus ROG Strix RTX 3090 or PowerColor Red Devil RX 6900XT should fit here without issue.

CPU cooler support is limited to 6.3 inches (160mm), which means owners of Noctua’s NH-D15s or Deepcool’s Assassin III will not be able to those chonky coolers. But, with a case like this, wouldn’t you rather show off your RGB-adorned AIO? As we’ll soon see in testing, going with an AIO might be a better choice for temperatures too. There's side, top, and bottom dust filters that will be plenty sufficient. There's USB ports and the power button in an area that fits in well with the cornered window theme. Provided screws for the fans going in to the lower chamber are too think of a diameter to my Noctua 140s. Had to find thinner but same threaded screws at HDepot This design is limiting, but half-height PCIe are readily available if you want an audio card, a capture card, or a networking card. The Hyte Y60 supports two 3.5-inch HDDs or four 2.5-inch SSDs, motherboards up to EATX in size and ATX power supplies that are up to 225mm long. The case also supports multiple large liquid cooling radiators, and has plenty of space where users can mount a pump/reservoir within their systems.The included riser cable is different than most others on that market that are basically just ribbon cables. This cable features a plastic piece at the top of it that mimics the top of the Y60 and is perfectly measured so there’s no excess cable length. The riser cable comes pre-installed, which made installing our motherboard frustrating, as the cable kept hitting the motherboard. This issue can be curbed by unscrewing the riser cable before system installation. But if you’re lazy like me, you’ll have to deal with it. The HYTE Y60 PC Case has been optimised to provide excellent cooling. To eliminate hot spots, it features cold floor cooling, with sweeping lateral vents integrated in the bottom of the chassis. Plus, with extensive ventilation throughout the frame and three pre-installed 120mm fans, the HYTE Y60 has a unique airflow path that will provide ample cooling to a wide variety of components. The case is mostly okay to assemble and install regarding the power supply and a vertical GPU with the included riser cable, however, the building process can still be rough at times. The case supports only 1 full-height add-on card and the rear case fan must be removed to add most motherboards. This might be a challenge for some users and make the building experience less enjoyable, especially if you have a chunky card like the Zotac GeForce RTX 4070 Ti. The Hyte Y60 supports ATX, MicroATX, Mini-ITX, and E-ATX motherboard form factors. It has no external 5.25-inch bays, 2 internal 3.5-inch ones, no external 3.5-inch ones, 4 internal 2.5-inch bays, and 9 PCI expansion slot positions. The case has a maximum GPU length of 940 mm, a maximum CPU cooler height of 406 mm, and a power supply maximum length of 600 mm. It does not include a fan controller or internal chassis lighting and has dimensions of 45.7 x 28.5 x 46.2 cm and a weight of 9.6 kg. Hyte Y60: Price UK No responsibility is taken for the correctness of this information. The listed offers do not constitute legally binding advertising claims of the merchants.