The designation for the FAG bearing series comprises numbers and letters or letters and numbers. It indicates the type of FAG bearing, the diameter series and, in many cases, the width series too. The basic designation contains the symbols for the FAG bearing series and the bearing bore. The prefix normally identifies individual FAG bearing parts of complete bearings (in certain cases, this may also be part of the basic designation)

Dimension series for FAG radial bearings (excluding tapered roller and needle roller bearings) Width series– increase in cross-sectional width Full-complement cylindrical roller bearings are available as non-locating, semi-locating and locating bearings as well as in single and double-row designs. X-life Axial spherical roller bearings 294..-E1, main dimensions to DIN 728 / ISO 104, single direction, separable Cylindrical roller bearings NJ4..-E, main dimensions to DIN 5412-1, semi-locating bearing, separable, with cage The manufacturing plant in Vadodara, Gujarat was set up in 1964 and produces a vast range of ball bearings, cylindrical roller bearings, and spherical roller bearing and wheel bearings and sold under the brand name of FAG. The second plant in Vadodara at Savli produces next generation deep groove ball bearings and large size roller bearings also sold under the name of FAG.

FAG bearing prefix

Cylindrical roller bearings with snap ring grooves are full-complement, double-row units comprising solid outer and inner rings with ribs, rib-guided cylindrical rollers and sealing rings. The outer rings have snap ring grooves for retaining rings. The inner rings are axially split, 1 mm wider than the outer rings and held together by a rolled-in steel strip. Locating bearings Cylindrical roller bearings NJ23..-E, main dimensions to DIN 5412-1, semi-locating bearing, separable, with cage Sealed spherical roller bearings WS222..-E1, lip seals on both sides, for continuous casting machines Cylindrical roller bearings NUP22..-E, main dimensions to DIN 5412-1, locating bearing, separable, with cage

Axial spherical roller bearings 293..-E1, main dimensions to DIN 728 / ISO 104, single direction, separable For all FAG rolling bearings in the range fromd=20mmtod=480mm(excluding double direction axial bearings), the bore code is formed by dividing the dimension of the bearing bore by5. Cylindrical roller bearings NU10, main dimensions to DIN 5412-1, non-locating bearing, separable, with cage Tapered roller bearings 323, main dimensions to DIN ISO 355 / DIN 720, separable, adjusted or in pairs Axial spherical roller bearings 292..-E1, main dimensions to DIN 728 / ISO 104, single direction, separableDue to the grooves in the outer rings, the bearing rings can easily be axially located. The bearings are therefore highly suitable for cable sheave bearing arrangements. The bearings are separable and are therefore easier to fit and dismantle. Both bearing rings can be given a tight fit by this process. Single-row cylindrical roller bearings with cage are available as non-locating, semi-locating and locating bearings. X-life Tapered roller bearings 313, main dimensions to DIN ISO 355 / DIN 720, separable, adjusted or in pairs Bearings of X-life quality have lower roughness Ra and superior geometrical accuracy of the raceways than comparable designs that are not X-life. As a result, these bearings have a higher load-carrying capacity and longer service life for the same dimensions. In certain applications, this means that a smaller bearing arrangement can be designed.

FAG bearings that have the same standardised designation are interchange­able with each other. In the case of separable bearings, it cannot always be ensured that individual parts with the same origin can be interchanged with each other. In Germany, the FAG bearing designations are standardised inDIN623-1. These designations are also used in many other countries. Please refer to SKF bearing designation.

Cylindrical roller bearings NU22..-E, main dimensions to DIN 5412-1, non-locating bearing, separable, with cage Fromd＞480mm, the unencoded bore diameter is given with an oblique after the bearing series, e.g. FAG 232/500-BEA-XL-MB1 bearingwith bore diameter d=500mm.

in accordance with standard (parts from these bearings must not be interchanged with parts from bearings Schaeffler with four plants and 11 sales offices has significant presence in India with three major widely known product brands - FAG, INA and LuK. Our delivery services in Australia are through DHL, typically despatched the Same Day and with a delivery time of between 3 and 5 working days. DHL - 3-5 Day Delivery

Our use of cookies

The cylindrical roller bearings have high rigidity, high radial load-carrying capacity and, due to the cage, are suitable for higher speeds than full-complement designs. Bearings with suffix E have a larger roller set and are thus designed for extremely high load-carrying capacity. The vast majority of our products are despatch the Same Day internationally, through DHL and with a delivery time of between 3 and 5 working days. DHL - 3-5 Day Delivery