If you denied the App access to your device location and selected “Don’t ask again”, the Android system will not prompt you again to allow access. Instead, you will need to manually enable Location access permission for the smART sketcher®app.Note:the actual screens and steps may be a little bit different depending on your device vendor and model. When using activity content SOS mode, each step of the drawing is transferred to the smART sketcher® 2.0 Projector via Bluetooth. As a result, it takes more time to project a drawing. Insert the SD content card into the top of the Projector. The first drawing on the SD card will be projected. Press the Circlebutton to Go to the Previous Drawing or Press the Pentagonbutton to Go to the Next Drawing.

Unleash your creativity and bring your artistic visions to life with the Smart Sketcher Projector 2.0. This innovative and user-friendly projector combines technology with traditional art, allowing you to easily trace and sketch any image onto paper, canvas, or other surfaces. Whether you're a beginner or an experienced artist, the Smart Sketcher Projector 2.0 is designed to inspire and enhance your artistic journey. Choose a pre-loaded picture on your smART sketcher® 2.0 Projector, the App gives step-by-step instructions. No other device is currently connected to the smART sketcher®Projector (only a single device can be connected at the same time). The SD might not be inserted correctly. Make sure the flat side of the card faces outward. Wiggle it gently to make sure it’s all the way in.You should not pair/connectthe smART sketcher®Projector to your device via the Android Bluetooth settings menu. This will prevent the smART sketcher®Projector App from finding the smART sketcher®Projector. To verify the smART sketcher® Projector is not paired in your Android Bluetooth settings menu: Pull out the batteries compartment and insert 4 x D batteries according the polarity that is engraved on the plastic. Try the Super smART subscription by signing up to our 1 month free-trial¹. We’re pretty sure you’re going to love this, but if you don’t, you can cancel your subscription anytime. If the SD card isn’t inserted properly, you won’t see an image (you will just see an Insert Card message). Make sure the flat side of the card faces outward and the card is fully inserted. Turn the Projector off and then on again and see if that helps.

Note: no need to pair and/or connect your device to the smART sketcher®Projector from your device Bluetooth settings menu; the App will automatically locate the smART sketcher Projector.

Sketch and color

You will first need to enable Photo Library Access from the App Settings and optionally grant OS permission depending on your mobile device OS platform and version. Note that this is required only once. If your device Bluetooth is turned on, the smART sketcher® App will automatically start scanning for the smART sketcher® Projector. Once you have selected a drawing, press the white Forward arrowto start. Trace the projected step, than press the white Forward arrow to move to the next step. Open your smART sketcher® app and go to the settings icon at the top left corner of the main screen. Drag the icon to the right to access. Before following the steps in the below troubleshooting guide first make sure the smART sketcher®2.0 Projector is operating correctly: if the Projector is under-powered, Bluetooth connectivity will not work.