When disabled, the Thunderbolt Technology feature is disabled, and any connected Thunderbolt adapter devices are not available in preboot or within the operating system. Open the Windows Display Properties and go to Multiple Displays control to set the display to the extended mode. Information in a flash: With data transfer speeds of up to 40 Gbps for faster data transfer, you can stay productive when connected to all your devices. External monitors require a certain amount of bandwidth to work properly. Monitors with higher resolution require more bandwidth. User Authorization - Allow User Notification devices at a minimum - the CM requests connection approval from the host SW and autoapproval may be given based on the Unique ID of the connecting device.

DisplayPort Only: Automatically connect to DisplayPort devices only. No Thunderbolt adapter or PCIe devices are allowed to connect. All other products will be delivered via the fastest available method (excluding bank holidays and weekends) and generally within 3-5 days, depending on customer location. Secure Connect - Allow one-time saved key devices at a minimum - the CM requests connection approval from the host SW and autoapproval is only given if the host challenge to the device is acceptable. HBR3 is DP 1.4 (8.1 Gbps maximum link rate per lane). With DP overhead, the effective data rate is 6.5 Gbps per lane.

Customer reviews

If only one monitor is shown, while the other is not, go to Windows Display Properties, and under Multiple Displays, select the output for the second monitor.

Hard drive retention: Hard drive retention is not available on models with a soldered hard drive, including XPS 9315 2in1, Chromebooks or Venue tablets, except the Venue 11 Pro.When enabled, this setting allows PCIe devices that are connected through a Thunderbolt adapter (that is PCIe devices behind the Thunderbolt adapter) to perform the PCIe device’s UEFI Option ROMs (if present) during preboot. Secondly as you have seen in above photograph, XPS 9550 along with WD19TBS drives 3 4k displays, 2 of them at 60hz while third one at 30hz (but then it is monitor limitation) along with native UHD resolution of 9550 itself. This is like paradise to me working from home as my job demands it! Reset the monitor to Factory Defaults. See the User Guide of your monitor for more information about how to reset the monitor to factory defaults. Ultimate connectivity: Thunderbolt™ connectivity makes it easier than ever to deliver power, data, audio and video as well as connect to system peripherals, no matter what system you use. Plus, with support for up to three displays, including a single 5K and dual 4K monitors, you can connect to everything you need.

For additional help, learn How to Set up Multiple Monitors or How to Troubleshoot Multiple Monitor Issues. Power your connections:optimize workspace with DellExpressCharge allowing a chatge up to 80% in one hour. Data transfer at super fast speed at 40GB per second. User Authorization: Approval is required for any new devices that are connected to the Thunderbolt port. Connectivity:multipule portsincludings audio, video, power and data as well as connections to system peripherals. Secure Connect: The Thunderbolt adapter port allows connection to devices that have been configured with a shared key.

Power Delivery (Power Provided)

HBR3 (HBR3 x4 lanes + HBR3 x1 - 32.4 Gbps) For Precision 7530/7540/7730/7740 with discrete graphics card Verify if the device is detected in Windows Device Manager and that the correct device drivers are installed. HBR2 is DP 1.2 (5.4 Gbps maximum link rate per lane). With DP overhead, the effective data rate is 4.3 Gbps per lane Terms Apply. Promotion ends 3 December 2023. Items are subject to availability. Max 5 units per customer. I know/understand that my laptop to be fully supported needs 210W and that this only would have delivered 130W at most. But because I'm not running the laptop at full blast all the time, I would have expected it to use 130W while consuming the battery for the remaining amount and while the laptop is idle slowly charge it up and such.