Portable music player, etc. Adjust the volume on the connected device. SD card Use an SD card to save loops and increase loop recording time. The contents of this document and the specifications of the product could be changed without notice. The available effect types include various bass effects and amp/cabinet simulation models. Effects can be selected from these types to be added to patch memories. Category

Now swipe down on the touchscreen to the settings menus and select Change Amp/Effect. This will return you to the previous Effects Board patch display but now with a ‘swap’ icon on each of the six effects slots. You might need this manual in the future. Always keep it in a place where you can access it easily. The FP02M Expression Pedal from Zoom is an external volume and effect parameter control for Zoom G Series, 500 Series, 234, 323, 3030, 1010, 2100, MRS1044 and any other compatible pedals. The pedal is housed in a sturdy metal chassis. It's a volume pedal, a Wah pedal and a pitch bender, all in one. Plug the FP02M into your Zoom guitar or bass effects device to add real-time control over volume, Wah or pitch, as well as effects parameters such as modulation rate, distortion gain, and delay or reverb level. Rugged enough for the road, the FP02M sports an all-metal chassis and comes with a ¼" to ¼" connection cable. The G6 provides a total of 22 cabinet emulations of all modeling amps. Plenty of classic amplifier sounds are included, and you can use them with or without included IR cab responses.LIFT ( ):This disconnects the ground pin from the ground. This is useful if noise is caused by a ground loop.

LIFT ( ): This disconnects the ground pin from the ground. This is useful if noise is caused by a ground loop. The B6 is very much larger and very much more capable than the B3 and its successor, the B3n. For a start, where the B3n offers a total of 67 individual ‘stompbox’‑style effects or amp models (each one of course separately configurable), the B6 offers around 115. And whereas the B3n enabled each patch to be built from a chain of up to three effects, the B6 accommodates six. But that’s just the beginning of the B6 story; there’s much more to it than just effects count and patch chain length. Probably the easiest way to begin to explain all there is to play with (and there is a lot) is to describe its physical format, so that’s what I’ll do. By using an SD card, the recording time can be lengthened and phrases can be saved. An SD card also enables use of other audio files as loops. Preselect You can use the G6 as a 2-in / 2-out interface, so you can record killer tones right to your favorite DAW.If an item can not be repaired, a similar alternative product or cash discount (as defined in this policy) will be offered This review period coincided with me rehearsing and playing a series of gigs as part of the Brighton Fringe Festival, so as well as it being used in the slightly sterile and low‑pressure environment of my home studio, it also got a proper cramped rehearsal studio and sweaty gig workout. It passed the test with aplomb and was the subject of admiring glances from both bandmates and sound techs. The only minor frustration for me was with the position of the input footswitch. Said switch is located at the top right and consequently requires rather more extreme one‑legged balancing to operate than it would if it were located front right where the much less used Bypass switch is located. The set list at the gigs had me swapping between electric and upright basses almost every other song, so I was doing quite a bit of one‑legged balancing — but perhaps swapping between instruments so often, rather than the footswitch position, was actually the problem that needed fixing... This enables wireless control of the B6 from an iPhone/iPad using the iOS/iPadOS Handy Guitar Lab for B6 app. USB (Micro-B) port Connecting a computer makes the following possible.