We require this information to understand your needs and provide you with a better service, and in particular for the following reasons: This DC input provides redundant power when the UniFi Switch is connected to the UniFi SmartPower Redundant Power System, model USP-RPS, via the USP Cable (not included). If there is an AC power loss or internal power supply failure, the UniFi Switch will draw power from the USP-RPS instead. In the event of a UniFi switch power supply failure, the USP-RPS automatically supplies redundant power to the failed device. One UniFi SmartPower device can support up to 6 devices until the failed device is replaced. The USP-RPS was created to ensure stable operation of Ubiquiti Networks devices regardless of possible problems with sudden power failure. It supports up to six devices with the UniFi SmartPower standard, including PoE switches USW Pro. A key feature of the system is the continuous monitoring of each connected network device. This is done thanks to the USP cable system, which is - in case of failure of the internal AC/DC power supply - an additional power source for the device in addition to the standard one. It is worth noting that the USP-RPS ensures automatic power supply restoration, thanks to which the network should operate without any interruption to the supply of communications. Control and management of the equipment is possible thanks to unified UniFi Network Controller software, while the status of individual elements or adaptation status can be read thanks to physical LEDs on the device and a small touch screen.

Note: Although the cabling can be located outdoors, the USP-RPS itself should be housed inside a protective enclosure. Ubiquiti UniFi Gen2 Switches offer a variety of features, including 10G SFP+ ports, PoE+ or PoE++ support, and Layer 3* switching capabilities. (*Layer 3 switching will be available in a future software release).Some UniFi devices have a proprietary USP port that allows them to be connected using a Ubiquiti USP-Cable (sold separately).

Note: Although the cabling can be located outdoors, the UniFi Switch itself should be housed inside a protective enclosure. The Ubiquiti UniFi USW Pro 24-POE is a configurable, Gigabit Layer 2 and Layer 3 switch with auto-sensing 802.3at PoE+ and 802.3bt PoE++. You may choose to restrict the collection or use of your personal information in the following ways: The primary purpose of the RPS (Pro) is to recover the device experiencing the internal power supply failure. Overload may occur multiple devices simultaneously experience a power interruption and their power requirement exceeds that of the RPS (Pro)'s power availability. In this case, power will be provided according to the priorities listed below. Priority Level

Standard Warranty: 1-Year

UniFi USP-RPS er et proprietært redundant Power system designet til at beskytte op til 6 UniFi SmartPower understøttede enheder mod pludselig strømforsynings fejl.