Switch display mode: Keep pressing up and down buttons simultaneously for two seconds when the battery is off, the screen display will rotate 180 degrees. You can view the screen from two different angles through this operation. Accurate reading of resistance: The reading of resistance becomes more accurate with the number down to the second decimal point. With the device turned on, press and hold the Up and Down Adjustment Buttons at the same time for 5 seconds.

Eleaf iStick TC40 Review | Planet of the Vapes

I’ve had one of these for a couple of years but it started to not hold a charge. Bought another to replace.The GS-Tank Atomizer is small and powerful. It can hold 3ml of e-liquid and has a clear glass tank. The silver colored mouthpiece and adjustable air hole base perform well, and look good doing it. As air is fed through the atomizer’s s ix adjustable air holes from the bottom, it produces cool and flavorful vapor. It’s a toughie one to conclude, on the one hand it’s an old and basic mod with just a USB-C upgrade, but on the other hand it’s still a lovely little mod that remains timeless and still looks current.I thoroughly enjoyed using it as an MTL mod, and the 2600mAh battery lasted days at 11 watts. The battery power indicator on the screen will keep flashing when the remaining power is less than 10%. It can be charged with the USB cable through the USB port at the bottom. It will take about 3.5 hours to get a full charge via 1A wall adapter The only update is that USB-C port instead of micro USB, the charge rate is still the same 1 Amp though and will take at least a couple of hours to charge, so there’s little benefit other than more compatible cables. We were sent the mod only to review but there are kit versions that either includes a GS Air tank or just the mod with an eGo adaptor and cable.

iStick TC 40W - There is no best only better User Manuel For iStick TC 40W - There is no best only better

The battery, which is 2600mAh features two modes. The first mode is the TC, or Temperature Control mode. Having this mode selected means that the device will reach its desired temperature selected and will then stop itself from exceeding that temperature.Large output and power capacity: Despite the small size, it can reach 40W output with 2600mAh power capacity. Med henvisning til bekendtgørelse om forbud mod reklame, synlig anbringelse og fremvisning m.v. af elektroniske cigaretter og genopfyldningsbeholdere med og uden nikotin § 3, stk. 1, skal jeg venligst anmode om at få fremvist det samlede produktsortiment Har du brug for hjælp eller mangler du hurtig svar på dit spørgsmål, så kontakt os endelig - Vores rare kundeservice er altid glade for at hjælpe! You can see its old-school origins as it still has base air inlets for older bottom air fed tanks and RDAs, I still have a couple of old base air fed tanks but to be honest I no longer use them as tanks have progressed into much better options these days, but it’s there for those that need it.

iStick TC 40W Temp Control - E-Cigaret Batterier Køb Eleaf - iStick TC 40W Temp Control - E-Cigaret Batterier

By adjusting temperature in TC-Ni mode, you can enjoy different vaping experience at different temperature settings. There’s not much point doing a ‘Performance’ section as it just performs as it should and I couldn’t test the TC mode, but knowing Eleaf, it should perform as intended. Conclusion With the device OFF, press and hold the UP and DOWN Adjustment Buttons for 5 seconds. The screen will light up and show the screen rotation. Repeating the process will rotate the screen 180 degrees.Atomizer Protection: When vaping time exceeds ten seconds, the output shuts off automatically with "over 10s" display on the screen. The screen is small andis clear and easy to read, but it isn’t very bright with little to no chance to read it in sunlight.The battery icon is pretty basic, as is the charging screen which simply flashes a battery graphic. As it comes with a Ni200 TC Atomizer head already installed, one can simply hold the central selection button down for five seconds and see TC Mode on the OLED. The temperature control allows you to set the maximum cut-off temperature. If you set it too low, the device will cease to vape. For instance, I usually keep it on 500˚F, and the temperature does not get over 390˚F providing a decent-sized, full capacity lung inhale. If you set the temperature to 350˚F, the device is will turn off in three seconds or so upon vaping because it is set too low.. With the device turned on, press and hold the Fire Button and the Down Adjustment Button at the same time for 5 seconds. The screen will display the message “Stealth Off”.

iStick TC 40W Battery Mod | Eleaf USA | Eleaf USA Eleaf iStick TC 40W Battery Mod | Eleaf USA | Eleaf USA

The battery power indicator on the screen will flash when the remaining power level is less than 10%. It can be charged with the USB cable through the USB port on the bottom of the device. It will take about 3.5 hours to get a full charge via a 1A wall adapter. The battery indicator will keep flashing during charging and the screen will go out when fully charged. Switching between Temperature Control and Variable Wattage Modes

Popular

The battery power indicator on the screen will keep flashing when the remaining power is less than 10%. It can be charged with the USB cable through the USB port at the bottom. It will take about 3.5 hours to get a full charge via 1A wall adapter. The battery indicator will keep flashing during charging and the screen will go out when fully charged. Electronic cigarettes may contain nicotine which is addictive. Electronic cigarettes are not suitable for use by: persons under the age of 18; persons who are allergic/sensitive to nicotine; pregnant or breast-feeding women; persons who should avoid using tobacco or nicotine products for medical reasons; or persons with an unstable heart condition. You simply get just the mod and a manual, there’s no extras at all, but as mentioned earlier; that will depend on which version/kit you choose. press the fire button and down button simultaneously when the battery is on to switch between Stealth on and Stealth off mode. In the Stealth on mode, you can vape with the OLED screen off and you can press the fire button one time to see current setting