The Torx Plus, also known as the Internal Plus, is an improved version of the original design. This version is designed to provide better torque transfer than the original design. The lobes on the screw allow for increased torque without causing much wear on the tool. Torx screws are commonly found on automobiles, motorcycles, bicycle brake systems ( disc brakes), hard disk drives, computer systems and consumer electronics. Initially, they were sometimes used in applications requiring tamper resistance, since the drive systems and screwdrivers were not widely available; as drivers became more common, tamper-resistant variants, as described below, were developed. [4] Torx screws are also becoming increasingly popular in construction industries. The metric system is a good fit for larger distances. It is not as accurate for smaller distances. Tamper-Proof If you need to know which size of Torx is the right one for a specific project, take a look at the Torx bit sizes chart. It will tell you which Torx bits are compatible with which screws. KC Tool

A Torx successor, Torx Plus, was introduced around 1990 when the original Torx patent was expiring. The Torx Plus patent subsequently expired in 2011. [16] [17] The lobes are more square to allow for higher torque and to minimize wear. The name is shortened to IP (Internal Plus) with sizes ranging from 1IP to 100IP [18] (sometimes listed as IP1 to IP100 [19]) and EP (External Plus) with sizes ranging from 1EP to 42EP as well as smaller sizes ranging from H7EP to H2EP and includes five-lobed tamper-resistant variants. [18] The specifications for these licenses are held by Textron. Standard Torx drivers can be used to drive Torx Plus screws, but not to full torque because of the loose fit. Torx Plus drivers will not fit into standard Torx screws. AW drive is a hexalobular-type screw head similar to Torx, with a tapered profile to aid in centering, developed by the Würth Group in Germany. [30] It is available in five sizes: AW10, AW20, AW25, AW30 and AW40. [31] Gallery [ edit ] TS Star Bits (5 Sided) 1/4"D 7pc - Part No. 3389 - Part of the TS Star/Torx* Plus range from Laser Tools" . Retrieved 14 July 2016.

Like all other fasteners, even Torx screws are available in different sizes. They follow a special ‘T’ sizing for the internal Torx an ‘E’ sizing for the external Torx. The size of the screwdriver or the drive bit must match with the size of the Torx screw. By design, Torx head screws resist cam out better than Phillips head or slot head screws. [1] Whereas the tendency of Phillips drivers to cam out under excessive torque has been listed as a feature preventing damage to the screw-head or driver, [5] Torx heads were designed to prevent cam-out. The development of better torque-limiting automatic screwdrivers for use in factories allowed this change. Rather than rely on the tool to slip out of the screw head when a desired torque level is reached (which risks damage to the driver tip, screw head, or workpiece), torque-limiting driver designs achieve a desired torque consistently. TORX PLUS Long arm L-Keys". Wiha Tools USA. Archived from the original on 7 October 2015 . Retrieved 14 July 2016. The Torx Plus drive system is another variation of the Torx. It is also known as External Plus. The lobes are more square than the original design. This design allowed for higher torque on the head. The Torx Plus also has five-lobed tamper-resistant variants. This design requires the right tools.

Whether you are buying a new set of Torx tools or replacing a broken one, you will need to make sure you buy the right size. There are three standard sizes of Torx, and each one can be distinguished by the T before a number. In addition to these, there are also specialized sizes that are designed for specific uses. You can browse the chart below to find the right tool for your project.Technical Information on Fasteners: Design recommendations 11.1 Inside drives for screws – AW drive (AW-Antrieb)" (PDF). Adolf Würth GmbH & Co. KG . Retrieved 2 March 2017.

For the Torx type of design, the angle is much closer to 90° than in the case of the hex head, and so for a given torque the potentially damaging radial force is much lower. This property allows the head of the fastener to be smaller for the same required torque, which can be an advantage in applications where space to accommodate the head is limited. The metric system is more widely used in other countries. In the United States, the Imperial system is still used. It is based on the Roman Empire's system, which considered one foot to be the length of a human being. This means that the same tool in metric units won't fit an Imperial nut. The SAE is an acronym for the Society of Automotive Engineers. It was created to standardize measurement in the engineering space. The SAE is now known as SAE International, and it has 138,000 members worldwide. The organization sets standards in North America for the construction and automobile industries.Sharke, Paul (June 2005). "Fast and Secure: how much proof is tamperproof?". Mechanical Engineering. 127 (6): 32. doi: 10.1115/1.2005-JUN-2. ISSN 0025-6501. Archived from the original on 2007-02-09 . Retrieved 2012-01-14. {{ cite journal}}: CS1 maint: bot: original URL status unknown ( link)