The setup guide will open and guide you through connecting your printer to your network using the “Connection via Cableless setup” process. Take complete creative control of your images with PIXMA and imagePROGRAF PRO professional photo printers. To prevent automatic connection to the printer in Direct Connection mode , change the connection mode after using the printer, or set not to connect automatically in the Wi-Fi settings of the device. The following screen indicates the model of your printer and the name (or SSID) of your wireless network. The Canon PIXMA MG3650 uses excellent printing quality as well as an HD scanner in a little, portable style. Having the ability to print wirelessly from your phone or the cloud is a reward, as well as the tool, is fairly very easy to mount and really easy to make use of.

Press & hold the [Resume/Cancel ] button until the alarm lamp flashes 15 times, and then release it. When the [Connection via Cableless setup] screen appears, hold down the printer’s [Wi-Fi] button (A) until the orange alarm lamp (B) flashes 2 times, then release after the second flash. A4 document print speed on plain paper is measured based on average of ESAT in Office Category Test of ISO/IEC 24734 standard. Mono Print Speed: A4 document print speed on plain paper is measured based on average of ESAT in Office Category Test of ISO/IEC 24734 standard. Seeking the best printer for your business? Hit your productivity targets with inkjet and laser printers that are a perfect fit for any workspace – including home offices.

PIXMA MG3650

As for a device already connected to the printer without using a wireless router, reconnect it via a wireless router.

Make sure that the lamp next to this button starts to flash blue and then go to your access point and press the [WPS] button within 2 minutes. Please note: A screen will be displayed asking you to select between a USB or wireless connection, please select [Wireless Connection]. If a device is connected to the Internet via a wireless router, and you then connect it to a printer in Direct Connection mode, the existing connection between the device and wireless router will be disabled. In that case, the connection of the device may switch to a mobile data connection automatically depending on your device. When you connect to the Internet using a mobile data connection, charges may apply depending on your contract. There are print speeds of 9.9ipm for mono and 5.7ipm for colour offered by this neatly-designed machine that can hold up to 100 sheets of plain paper. When the printer has successfully made a connection to your wireless network, the power and Wi-Fi lamp will stop flashing and remain lit.

Canon PIXMA MG3650 Drivers and Software (Macintosh)

When printing ISO/JIS-SCID N2 pattern on 10x15cm Photo Paper Plus Glossy II using default settings.

Please wait while the setup discovers the printer. During this time the network connection on your computer is temporarily disabled.

Product Specification

Explore your creative side with the arts and crafts on Creative Park or use Easy-PhotoPrint Editor to design your own greetings cards, collages and calendars The connection between your device and the wireless router will be temporarily disabled while the setting is changed. Do not proceed to the next screen of this guide until setup is complete. Scan speed may vary depending on system configuration, interface, software, scan mode settings and document size etc. If an error appears, disconnect a device that does not use the printer, then configure settings again.

This printer cannot be used over Wi-Fi and via wired LAN connection (Ethernet cable) at the same time. For users where the printer could not be detected, please continue with the USB installation detailed in step 6. When the following screen appears, connect your printer to your computer using the supplied USB cable. This is the cable with the symbol on the connector.When you connect a device and the printer using Direct Connection, the connection information will be saved to Wi-Fi settings. The device may be connected to the printer automatically even after disconnecting it or connecting it to another wireless router. You cannot connect to a wireless router and a printer in Direct Connection mode at the same time. If you have a wireless router, we recommend that you use the wireless router to connect to the printer.