Dry clean with the green Dust-Mop from the Osmo Opti-Set on a regular basis to prevent the build up of any dust or lint on the surface of the floor.

Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. Application of top coat of clear Osmo Polyx®-Oil Original can be carried out once the first coat has dried. However, if the first coat was a coloured Osmo finish ( eg Polyx®-Oil Tint or Wood Wax Finish Transparent) wait approx. 24hrs before applying Osmo Polyx®-Oil Original clear top coat. Multi-purpose cleaners such as washing up liquids and detergents are highly detrimental to the finished surface and is not recommended to be used as discolouration or staining may be possible.The second coat after applying Spray-Wax 3010 Natural depends on the desired surface results (trial application): Use floor protectors on the legs of furniture to avoid scraping or scratching. If your furniture has floor casters make sure that they are of the wide variety. If they are of the narrow metal variety, there are special plastic and velvet cups that can be used underneath. RP (Reduced Pressure) Technology: Spray pressure approx. 1,6 – 2,0 bar, Nozzle approx. 1,6 – 1,8mm. Damp clean with Osmo Spray-Mop which makes it really easy. The cleaning concentrate (Spray-Fix) effectively removes dirt without wear of treatment. Shake very well before use. Failure to mix all ingredients ( and colour) could lead to an increased patchiness.

Be cautious when moving heavy objects such as electrical appliances and furniture. Always make sure you lift and never push or drag. If you cannot lift, slide a blanket or carpet under the objects to prevent scratching and gouging. For top coating Osmo white colours use white tinted Polyx Oils ( eg: 3040 or 3240) to avoid yellowing.Apply approx. 2 teaspoons per m² to the surface and spread extremely thinly with Active Fibre Cloth from Osmo Opti-Set. Airless/Airmix: Depending on the operation of the operator/machine, the equipment and the condition of the respective system as well as the type and shape of the workpieces to be treated. For kitchen worktops, Osmo Wood Protector 4006 is an optional pre-treatment for absorbent wood like: Pine, Birch or Spruce. Osmo Wood Protector 4006 will help to raise the water repellant qualities of the timber prior to applying Osmo Top Oil. For dark and extractive-rich woods (e.g. Iroko, Teak, Mahogany, Sapele, Wenge, Merbau, Jatoba, Cedar etc.), we recommend using Osmo Wood Wax Finish Clear Extra Thin. A trial application is recommended.