span class="fs-small">Once the colleague has started to put the transaction through, you will be asked to finish the application on a mobile device (e. No cutting of wires or splicing is required, you simply crimp a fuse tap on the end of your accessory device's bare wire, then plug and play at the fuse box. To ensure compatibility with your specific fusebox, there are 4 variations of the add-a-fuse that we carry: Micro2 Fuse, Mini Fuse, ATO Fuse and Low-Profile Mini Fuse.

Our full range of services enables us, to offer you, comprehensive and professional support for any type of vehicle, no matter what service you require. This will link your camera to your fuse box and ensure the dash cam powers on when you switch on the ignition, and reverts to parking mode when you switch the ignition off. You simply remove the fuse from the slot you want to use, and put that fuse into the empty slot on the fuse tap.A high current to any component equals instant failure, therefore, the fuse ensures that current stays at a reasonable level for the component to continue to function. Fuses do not blow on voltage spikes, they measure current, not voltage, that is why they are rated in Amps, not Volts! It's advisable to utilize a multimeter to measure the active power flowing through the existing fuse already, ensuring that combining that initial draw with the draw of the battery does not surpass the fuse's limits and avoiding overloading.

Your credit rating may be affected which will make it more difficult or more expensive for you to obtain credit in the future. We don’t share your credit card details with third-party sellers, and we don’t sell your information to others. Add-a-fuses may power any accessory or gadget—not just a dash cam—by inserting them into already-existing fuse slots. With the small draw of a dash cam it’s unlikely to impact in reality but people may use fuse taps to wire in other accessories or may use smaller supply circuits so would be better with the right leg to live. Then, the metal sleeve of the connector is compressed around the exposed wire using a crimping tool.Fuse taps can be used to help you quickly and easily integrate the Power Magic Pro into your vehicle's electrical system. Using the tester above (or a multimeter) was needed to know which side of the fuse slot had the 12v power coming in. Thinkware's TWA-SH is a hardwiring cable that connects your Thinkware dash camera directly to your vehicle’s fuse panel, which allows the camera’s parking surveillance mode to function while the.