For such a cutting-edge business, Ecomotive’s turbo cleaner is very much in-line with competitors’ offerings, that’s not to say this is a bad thing however. Like rivals, Ecomotive’s turbo cleaner spray promises to clear turbochargers of unwanted contaminants, restoring conditions to manufacturers specifications. This will allow resumption of correct air: fuel ratios along with optimum performance and restored fuel economy as a direct result.

Revive is a safe water based, non toxic, non corrosive and non flammable fluid, using technology developed and used for the cleaning and maintenance of aviation jet engines, power station turbines, large marine diesel engines and now automotive engines. Simple to apply and massive in potential gains, turbo cleaners are a product that is becoming ever more relevant in today’s modern era of turbocharged engines. Nearly all performance cars of the last 5 years have come fitted with a turbo, while you will struggle to find a diesel vehicle without one made in the last decade. Trying one of these inexpensive turbo cleaning products could not only save you thousands in garage repair bills, but should give any turbo-powered vehicle an entirely new lease on life. Avoid this headache by using the CRC cleaner, helping ensure the valves and/or turbo do not become bogged down with carbon and other debris. The solution we are discussing today offers VW owners, and other diesel owners hope of an easier way. The Revive Turbo Cleaner is a water based non-toxic, non-flammable, substance that is sprayed into the intake of the turbo and goes through you engine clinging to the carbon deposits, breaking them loose, and remove them from the engine. Loads easier than removing the turbo. JLM’s product is suitable for all turbo-powered diesel engines, applied simply by adding into the fuel tank. One bottle is suitable for mixing with up to 70 litres of diesel fuel, to ensure maximum effect. No further dismantling or assistance is required, simply drive.I wanted to try to get some hard data on the results of the Revive Turbo Cleaner verses relying on the ole’‘butt dyno’ which doesn’t translate well over the internet. So I fired up VCDS and took some videos of the Specified Boost (red in the graphs) and Actual Boost Green in the graphs. But I can really tell a difference in the before and after just by driving it. I live in a fairly hilly area and the car would sometimes go into limp mode when pulling up some of the hills if I was hard on it. I couldn’t make it go into limp mode after the treatment, and areas that I used to have to downshift into 4th or 3rd I didn’t have to now. Before ALL of the above codes were cleared with the exception of "0415 : Engine Oil Temperature above normal range" which required the changing of the temperature sensor itself. This item wassourced directly from Freightliner and Rob changed it out which eliminated the final code. Leave your turbo neglected for long enough, and the soot built-up can sap a significant amount of power, or worse, seize the turbo altogether. The car, an Audi A6, has done 102800 miles of, in the main, motorway style driving, giving me on average 51 miles to the gallon. The power and acceleration were fine and the only problem seemed to be a bit of smoke at start up and when I accelerated away at speed. A friend then said to me that this may be due to the turbo charger getting clogged with carbon and this could lead to the turbo over boosting and giving me an engine warning light / breakdown error. As I was given details of 'Revive' some time ago I dug out the sheet to re-read the details. This seemed to be what was needed to do the job, so I booked my car in for the treatment whilst having my M.O.T test. It would appear to be a very effective product cleaning the turbo and throttle body as well as other parts of the aspirating system as well. I am sure that other users will agree that the Revive product will give a new lease of life to their engine and prolong the life of their turbos as well. Many thanks

Cleaning your turbo is optional, but should not be neglected as deposits will build up. It doesn’t matter how you drive your car, but if you wait until you have turbo problems, you run the risk of incurring damage to your vehicle. Consult the factory service manual to find the location of your vehicle’s turbo and associated components if you are unsure where they are located on your specific make, model, and year. Best Turbo Cleaners for Both Diesel and Gasoline Engines The problem often worsens during higher combustion pressure and leaner mixtures. This can result in an increase of unburnt fuel mixture in the chamber, which when the valve is open increases the carbon deposit exposure. Often the air passing via the valve has insufficient heat to burn off the deposits. The product is safe for use in all diesel and petrol engines, while Ecomotive recommends using the spray around every 3000 miles to keep parts clean and issues to a minimum. Think of it this way. You will happily spend a little extra for more data on your phone, a nicer bottle of wine and that slightly plusher sofa. Turbo cleaners simply aim to improve the driving experience of your vehicle. They will maintain its efficiency and reliability, whilst also saving you from expensive repairs in the future. For such a small outlay, there really is a lot to gain and not a lot to lose.The first of the pour-in additives featured here comes from a firm based in the Netherlands, JLM lubricants. The company is just a decade old but, their use of high-quality testing and serious research is making a big impact on the fuel additive market. Professional level products for the regular consumers are what JLM specialise in, resulting in products such as their diesel turbo cleaner.