Leather and Fur Wash Concentrate is suitable for washing almost every kind of leather. This can be done in the washing machine,at a low temperature (under 35 °C (95 °F), the same as for wool. Rest assured that, provided you follow the instructions, the leather will not shrink and it will come out clean and soft.Amount: TOP Life is a new coating for leather, imitation leather and plastic parts, which specifically seals the surface for a long time.It is a finishing topcoat (clearcoat)The DIY version can be applied with a sponge (for end customers).The professional version must be sprayed!It barely effects the gloss levelIt offers high protectionIt barely changes the surface appearance (slightly shiny/slightly slippery => goes away within 48 hours)It has up to 12 months service life For subsequent care, take some preserver with another cloth from the set and first rub in the rag. Apply a thin layer of care to the leather with the cloth and polish if you want it to shine. C for 1 - 2 minutes. Afterwards, the leather can be dyed normally with Leather Fresh or Leather Colour / Top Coat. After dyeing, simply peel off the thread

In case of scratches, abrasions and slight fading (frequent entry in cars and seat area in furniture), the original colour of the leather is refreshed with our Leather Fresh. The colour can be determined either on the basis of our colour chart or on the basis of a leather sample. With the Cabrio Dye Set, you can dye a faded textile convertible top. The set includes everything you need, from the top cleaner to the dye and final impregnation. With a regular but economical follow-up care that takes place thereafter, further treatments with the old leather Softener are not necessary.

... and many more car leather colours!

Always test any products first on a hidden area to test for colour match!Firstly, clean the leather thoroughly and prepare the surface. UseMild Leather Cleaner for normal degrees of soiling or Strong Leather Cleaner to remove heavier dirt (where the leather has been neglected for many years). Cleaning prior to treatment ensures the paint bonds to the surface well and ensures durability. Use Leather Cleaning Brush to effectively remove all ingrained dirt. Cleaning removes dirt but for long lasting results you should also de-grease usingDegreaser.Use a sponge to apply the colour evenly, working from seam to seam. Dry afterwards with a hair dryer. On small spots, a one application is sufficient. Apply multiple thin layers and dry each layer using a hair dryer.A day later, after it dries, applyLeather Protector. It gives the leather a good sheen and helps blend the repair. It contains antioxidants, which stops the leather's decay, and its UV filters protect the surfaces of old and valuable leathers from bleaching and fading. Also keeps the leather supple. keen eye for colours and lots and lots of mixing experience. This will no longer be an issue - introducing the ColourScannerPRO! The ColourScannerPRO

Always test any products first on a hidden area to test for colour match!Firstly, clean the leather thoroughly and prepare the surface. Use Mild Leather Cleaner for normal degrees of soiling or Strong Leather Cleaner to remove heavier dirt (where the leather has been neglected for many years). Cleaning prior to treatment ensures the paint bonds to the surface well and ensures durability. Use Leather Cleaning Brush to effectively remove all ingrained dirt. Cleaning removes dirt but for long lasting results you should also de-grease usingDegreaser.Use a sponge to apply the colour evenly, working from seam to seam. Dry afterwards with a hair dryer. On small spots, a one application is sufficient. Apply multiple thin layers and dry each layer using a hair dryer.A day later, after it dries, apply Leather Protector. It gives the leather a good sheen and helps blend the repair. It contains antioxidants, which stops the leather's decay, and its UV filters protect the surfaces of old and valuable leathers from bleaching and fading. Also keeps the leather supple.

Care & Cleaning Kits

After massaging, let the cleaner sit in the shade for 5-10 minutes (do not use sunlight or additional heat sources), then rinse thoroughly with clear water (high-pressure cleaner is recommended) until dirt and cleaner are flushed out. suitable for several vehicle interiors and furniture sets or boat interiors (Please ask us for 1 liter set) .

Basically, the leather should be thoroughly cleaned before a colour refresh and care. With the Leather Cleaner Mild for normal soiling or the Leather Cleaner Strong for extreme soiling (barn find, etc.). In this way, you prevent the fixation of dirt on the leather by the colour refreshment and care. The leather cleaning brush facilitates the work in case of heavy soiling in the depths of the grain. After cleaning with the Leather Cleaner Strong or with freshly maintained or greasy leathers, you should additionally degrease the leather with the Leather Degreaser before using the Leather Fresh. This repair kit is ideal for repairing scratches, abrasions or slight fading on leather furniture or leather car seats.Contents1 x Leather Cleaner, 200 ml1 x Sponge for cleaning1 x Leather Cleaning Brush1 x Degreaser, 150 ml1 x Leather Sanding Pad1 x Leather Fresh Dye, 150 ml1 x Sponge for applying fresh dye1 x Protective Glove1 x Leather Protector, 150 ml1 x Polishing Cloth1 x Instruction flyerApplication Fine work of dyeing or local gluing is easier if the mini brush is used. For surface care, we recommend using the Leather Protector. The Leather Protector stops the decay of the leather with its antioxidants, and with its UV filters the surfaces of old and valuable leathers are protected from fading. It also restores a supple surface to the leather. The leather preserver protects against wear and clothing discolouration in the use area.Only start treating old leather with Softener when the leather has completely dried after cleaning. Apply some old leather Softener to the second sponge or a clean cloth from the set and wipe the leather with it. After application, let the leather rest at room temperature for at least 24 hours so that the old leather Softener has time to soak into the leather. Do not leave the vehicle too cold or in direct sunlight! You can repeat the process if necessary. We recommend that you do no more than 3 treatments. The Artificial Leather Clean & Care Kit contains everything you need for the cleaning and care of strained artificial leather and plastic surfaces. In cold temperatures, the Elephant Leather Preserver is not easy to work with. Therefore, work at a comfortable temperature or slightly heat the preserver with a hair dryer. leathers, the covering power is not sufficient! Recoloring is not possible!Nubuk Fresh can be applied either with a sponge, a pump