A Mesh node which is connected to Ethernet and allows Wireless Clients or Other Mesh nodes to connect to it. That will open a new window to configure the VPN settings. See the table below for a description of what each setting does and the recommended settings for connecting an SSL VPN tunnel: Please note that in this example with the Vigor 2927, WAN1 is the first available Ethernet WAN port, But on DSL/Ethernet routers like the Vigor 2866, WAN2 would be used instead. The configuration is otherwise the same. Vigor2927 Series supports both LAN-to-LAN VPN and Remote Dial-in VPN, up to 50 VPN tunnels can be set up simultaneously. All the industry standard tunneling protocols are supported, including PPTP, L2TP, IPsec, and GRE, and it's compatible with 3rd party VPN devices. The mesh nodes status and other information can be viewed via the DrayTek Wireless App or the Mesh Root's Web Interface.

DrayTek VigorSwitch switches can be provisioned and managed through the router with DrayTek’s Central Switch Management system, which allows you to: VigorAPs set up as Mesh Nodes do not need to be configured, they're managed by the Mesh Root once they've been 'adopted' into the Mesh network. To configure the router to not use VLAN tags on its Ethernet WAN port, ensure that the Customer and Service VLAN Tag Insertion values are set to Disable. Introducing the DrayTek Vigor 2927 series New, high speed Gigabit routers, ideal for small business and remote working If the details are correct, the account will be able to log in and it will be possible to access the router's Command Line Interface.

Ideal VPN router for SMB

Vigor2927 Series has two Gigabit Ethernet WAN ports that can be used for any types of connection, 3G/4G/LTE USB modem can also be attached to the USB ports of the router, and offer wireless Internet connectivity in case the fixed lines are not available. All of the WAN interfaces can be configured to be operated in either Load Balancing mode, which will be active all the time, or in Failover mode, which will be active only when detecting connection loss or heavy load on the primary connection. Enable this to use a newer DrayTek SSL VPN protocol, which can give higher speeds. Disable this if there are VPN stability or performance issues

The DrayTek Vigor 2927 Simultaneous Dual-WAN Broadband Router allows you to make the most of FTTP Fibre Broadband with Gigabit WAN throughput, extensive Firewall, Content Filtering, VPN client/server and Quality of Service controls. The Vigor 2927 provides a reliable, flexible, and secure network solution that is ideal for Small Businesses and Home Offices. Key Features The ‘ax’ models such as the Vigor 2927ax can use this and newer firmware. Since 4.4.0 version, installing 'ac' firmware on an 'ax' router will NOT disable the router's wireless LAN capability.For most Fibre networks in the UK & Ireland, no VLAN tag is required for Internet connecitivity on the Vigor 2927 router. For example with the Openreach Fibre network. If VLAN tags are used by the ISP, they are usually handled automatically by the ISP supplied ONT. London, September 16 2020 –Business class networking solutions manufacturer DrayTek is delighted to announce the introduction of the Vigor 2927 series. This new line of DrayTek routers offers dual Gigabit WAN throughput, enhanced broadband failover, wireless and firewall VPN features - perfect for small business, home offices and remote workers.

A typical requirement for connecting a VPN tunnel between two points is that the VPN server must be directly accessible on the public internet. Sometimes this can be achieved with NAT Port Forwarding if the router is located behind another router, but if the router is connected to 4G Mobile Broadband or is behind Carrier-Grade NAT (CG-NAT), connecting to that VPN server may be impossible. DrayTek's VPN Matcher service helps DrayTek routers behind NAT to allow Dial-In Teleworkers to connect, or connect two DrayTek VPN routers that are behind NAT and could not normally establish a VPN tunnel. DrayTek SSL VPN for Dial-In Teleworkers & LAN to LAN This will log the output of the session shown above to the " log.txt" file located in " C:\Users\User\Desktop". This can be opened in a text editor such as Notepad and can be used for recording the output of log options in the CLI such as " log -wt" Entering " ?" as a command will show which commands are available. Additionaly, entering a command followed by " ?" such as " mngt ?" will show options and sub-commands available. Standard (plaintext) HTTP is disabled, and encrypted TLS/SSL is in use. Use a https prefix to access the router WUI using SSL/TLS.Enable the router's Hardware Accelerator. To do that, go to [Hardware Acceleration] and enable it for TCP and UDP to accelerate all sessions. Vigor2927 Series also covers comprehensive functions, including VLAN, Bandwidth Management, Quality of Service, DNS Control, SPI Firewall, Web Content Filtering, and Central Management solutions to provide a reliable and secure business network. Vigor2927 LTE Series is a dual-Ethernet WAN firewall router with embedded 4G/LTE connectivity. Embedded 2 SIM slots (1 SIM online at a time) and compliant with LTE Cat 6 to deliver the lightning speed of up to 300/50 Mbps (DL/UL), providing load-balancing and failover for your business continuity. Featuring VPN, QoS, route policy, firewall, content filtering, bandwidth management, captive hotspot portal, and a lot more, this is the ultimate router that does it all for SMB. The series includes built-in 802.11ac Wave 2 Wi-Fi models. DrayTek offers superior broadband failover options. The Vigor 2927 'L' models, with two SIM slots, is ideal when connectivity is mission critical. In the event of an ISP service interruption, the router can switch to a mobile broadband connection using one of the two SIMs. Building on the success of the Vigor 2926 and 2925 series, DrayTek UK/IRE is excited to offer new routers for small offices and demanding home offices,” stated Julian Hubble, DrayTek Sales Director. “ The Vigor 2927 delivers the reliability and flexibility you expect in a DrayTek product, all with a total NAT throughput of 1.8 Gbps or 950Mbps per-WAN.”

Connect the ONT into the router's WAN2 port. Make sure that WAN2 is enabled and not currently being used as LAN port P6.The Vigor 2927 manages DrayTek VigorAP access points and VigorSwitch switches connected locally to the router. This enables you to centrally control, manage and administer multiple AP & Switch devices installed around your building/campus from just the one router. Central AP Management The Mesh Root provides Internet and network access. This controls the other VigorAPs in the Mesh Network and provides Internet connectivity. With multiple LAN subnets and VLANs, the Vigor 2927 can manage up to 8 separate networks. Each network can have its own Content Filtering, Firewall, Quality of Service and Route Policy. Microsoft Windows does not have an SSH client utility built-in, an SSH utility such as PuTTY (a free terminal utility) is required - This article will demonstrate how PuTTY can be used to connect to the router's Command Line Interface, but any SSH client utility will be able to connect to the router this way. These router models employ a different method for hardware acceleration, that is always on and does not need to be enabled or configured.