The Wire Anchors are robust and zinc plated for long life and can be usedwith any wire, cord, or galvanised wire. Am sure yesterday’s blog posting on moments left a few folks scratching their heads. There actually was a method to my madness, as it leads into today’s topic. These bases are not designed to resist overturning (moment) loads. Now this poses a challenge – how to connect post frame building columns, to a concrete foundation? Size 1 Wire Anchor - Suitable for post fronts from 85mm to 115mm wide, with a depth of up to 32mm - measure the side, from the front of post to the slot where the timber sits.

Wire Anchors are a unique product designed by Rivelin Glen Products to fit without drilling to a concrete fence post to act as an eye. High demand for our products and steel shortages continue to impact our manufacturing capacity , consequently A pier foundation would be one where isolated holes are augered or dug, then poured full of concrete. Size 2 Wire Anchor - Suitable for postfronts from 85mm to 115mm wide, with a depth from 32mm & up to 40mm - measure the side, from the front of post to the slot where the timber sits. Many may have seen various column bases at their local lumberyard or big box store. Manufactured by either Simpson or USP (similar to Simpson CB66), these products have some serious, and perhaps fatal consequences if used to support posts in a pole building.Size 0 Wire Anchor - Suitable for post fronts from 75mm to 85mm wide, with a depth of up to 32mm - measure the side, from the front of post to the slot where the timber sits.