In terms of eco-friendliness, both adhesives are safe for the environment. However, Pallmann P4 adhesive is a better choice for you if your customers are looking for a completely solvent-free adhesive. Which should you choose? Goods supplied incorrectly entirely through the Company’s fault will be re-supplied at no cost to the Customer.

Before use, ensure the air temperature is above 18°C, the floor temperature is above 15°C (with under floor heating max 20°C) and the relative humidity is less than 70%. If necessary, bring the adhesive to the right temperature. The surface should also be slightly textured. If applicable, it must meet the requirements of local standards or codes of practice. If necessary it should be professionally prepared for laying. A primer is typically not needed. If the sub floor is problematic the use of a primer like Bona D501 Easy to clean properties which mean it won’t harm the finish on hardwood floors and pre-finished trim.Bona R848 is an elastic 1-component Silane based adhesive for dimensionally stable, multi layered engineered parquet and solid boards Sandblasting, shot blasting or scarifying may be necessary to completely remove some of these residues When using Bona R848, the use of a primer is generally not necessary if the subfloor and conditions are suitable - if you're unsure, our Technical Team will be able to advise. Do not allow more than 30 minutes of open time before firmly setting flooring into the adhesive. Higher humidity can decrease open time

For full application and coverage details, please refer to the 'Technical Information' Datasheet link above. Cleaning agent: Bona Cleaning Wipes, Bona S100, acetone, ethanol. Hardened adhesive can only be removed mechanically. Looking for a stronger adhesive for wider engineered flooring? Try Bona Quantum, or for ultimate strength, see Bona Titan.Bona R848 adhesive 15kg is an elastic one-component silane-based adhesive with excellent rib stability for the installation of engineered or solid wood floors (solid wood floors up to 190 mm wide boards).

Mosaic parquet or any other similar solid parquet: approximately 900 g/m², Bona Trowel 850 G or 850 F Bona R848 adhesive is a one-component, moisture-curing adhesive. They designed this product specifically for wood flooring installation. This adhesive is suitable for all types of wood flooring, and you can use it on both concrete and wood subfloors.

Sales & Support

As a water and solvent-free adhesive, Bona R848 causes nearly no swelling of the wood once it has been installed. Pallmann P4 adhesive is a one-component, water-based adhesive. They designed this product specifically for wood flooring installation. This adhesive is ideal for engineered solid wood floors; you can use it on concrete and wood subfloors. You can also use it on plywood, calcium sulphate screed, cementitious screed, and concrete. layered pre-finished parquet, boards and solid wood planks (max. 22 x 120 mm): approximately 1350 g/m², Bona Trowel 1250 F or 1250 G Bona R848 adhesive is also VOC compliant, which means it contains low levels of volatile organic compounds. This makes it safe for both the installer and the environment. Here at Ultimate Floor Care, we sell this product in the following ways: