NERF Official (2016-04-04). NERF - 'Modulus Recon MKII' Blaster Files: Inspiration (Video). YouTube. The Kohls-exclusive Recon CS-6 Special Edition includes a Recon, as well as two additional six dart clip and twelve more Streamline Darts. The front of the original Recon has a small protrusion near the bottom with a five-dot "dice" pattern on each side. This prevented attaching tall barrel extensions, such as the Mega Dart Barrel Extension from the Tri-Strike, to the blaster. The new version has this protrusion removed to give the blaster a flat front. A modded blaster can shoot further and with more intensity compared to FOF (fresh out of factory) blasters. It can give you the upper hand in your next battle. A modification or “mod” is anything you do to your blaster that changes its looks, form, or functionality. Doing a custom paint job, adding your own accessories and parts, and working on the internals to increase power are all considered mods.

Alpha Trooper CS-18 • Deploy CS-6 • Longshot CS-6 • LongStrike CS-6 • Raider Rapid Fire CS-35 • Rayven CS-18 • Recon CS-6 • Stampede ECS Remove the two screws in the top of the priming slide, as in picture five. Do not remove the slide pieces yet.Step 1: Remove the bolt sled and plunger from the blaster. Unpin the plunger assembly from the bolt sled using a nail, small screwdriver, or punch. You can do this by inserting the nail, screwdriver, or punch into the hole that houses the retention pin and apply pressure. (Pic. 1-2) The Recon MKII was inspired by the N-Strike Retaliator [2], making it a successor of sorts. In part, and perhaps due to its name, it may also be considered a successor to the N-Strike Recon CS-6.

The Recon CS-6 features a reverse plunger plunger system. Because of this, it is usually disliked in modding communities. The 2008 version of the blaster notably has a shorter plunger tube, due to the 2008 product recall and redesign of the plunger. The O-ring seal on the plunger tubing makes sure that the air compressed by the plunger assembly and spring does not leak out during compression. Some blasters come with an excellent O-ring seal, while others come with undersized or loose O-rings. Improving this seal is an easy mod that can add a few extra feet to your shots. One can dual wield the Recon by using the tactical rails on the slide to prime each blaster simultaneously. This drastically reduces rate of fire, though.Step 2: Remove the plunger from the plunger tube and gently pry the O-ring out of its groove with a flat head screwdriver. Be careful not to damage the O-ring if you plan on reusing it. (Pic. 2) Step 2: Use gloves to hold the plunger tube and drill from the end that has the O-ring. It will take considerable pressure to get the bit to catch the plastic. Wearing a glove will prevent you from suffering a burn on your hand, should the bit catch the tubing and start to spin. (Pic. 4)