The Threaded Tank Connector has been designed like a socket/joining bush, allowing for a rigid pipe to be solvent welded on either side of the connector. Kockney Koi Threaded Tank Connectors are unique in that they accept the same size Solvent Weld Pipe on either side of the fitting. Pond plants are sent directly from our supplier to make sure the plants you receive are fresh and in great condition.

Please see note below on tank connector internal diameter sizes and recommended hole drill size range. These Bulkheads - Tank Connectors are sized so the correct pipe fits 'inside' of the fitting and is clamped with the gland. Demountable Unions are ideal for positioning before and after Pumps, UVC’s and Filters to allow them to be easily removed for maintenance or replacement. At Cotswold Koi we understand The importance of pipe work, mistakes made in pipework are one of the most common we come across and can be very costly and hard to change at a later date. If a larger bore diameter is required, we recommend upsizing on the tank connector bulkhead and using reducing spigots in each end to maintain a constant internal diameter.Our well trained staff have many years of experience in Horticulture, Agriculture, Parks, golf and domestic irrigation. It is suitable for domestic repair maintenance and improvement work making it suitable for domestic and industrial applications. The connecting Solvent Weld Pipework can then be glued into place using Solvent Weld Glue for a permanent connection. However, this excludes damages caused by accidents, neglect or misuse of the Pvc Metric Pressure Pipe Tank Connector / Bulk Head.

All fittings and pipework have smooth bores which aid in good flow characteristics and resistance to abrasion. These Elbows/Bends are great for joining two sections of pipe at a 45 Degree angle with limited friction loss. Black Waste 90 Degree Bends should be used in conjunction with Black Waste Solvent Weld PVC pipework.Unfortunately the use of pressure pipe and fittings in the past has simply been too expensive for the majority of Koi keepers, despite it being the preferred choice. Please Note: Due to the design, these tank connectors reduce the diameter in the centre of the connector. Black Waste Straight Connectors should be used in conjunction with Solvent Weld Black Waste pipework.

A pressure pipe fitting that provides excellent chemical resistance to most solutions of acids, alkalis and salts and solvents that can be mixed with water.

Before purchasing any threaded tank connector makes sure you have doubled check the Outside diameter of your ridged pipe.