From fixing a dead phone that won’t turn or charge to flashing a new ROM, here’s your all-in-one guide on how to repair a dead Android phone.

If your dead android phone still won’t turn on or charge after plugging it to a working charger for 30 minutes, you should force it to restart. Doing so will close all the active sessions on your phone and restart it. Try any of these methods to force your dead Android phone to restart. If you dropped your phone and noticed it wasn’t charging, it might be due to a faulty display. Sometimes, when a phone has fallen, the display inside gets damaged even though there isn’t any visible damage to the outside screen. You can try ringing your phone or using some other way to get it to vibrate or play the notification tone.

Replace the device [Ultimate Solution]

If you feel a vibration or hear the notification sound, the phone is alright, but the display has been damaged. This would require you to go to your nearest and repair your phone, but depending on the company and the phone model, a display replacement can be pretty expensive. Flash Your Phone’s Software If you have a custom ROM installed on your phone, that could be a reason, as the incompatible kernels may lead to some sort of damage to the motherboard, causing the phone to malfunction. Here are some ways you can try and remedy this problem. Once in Recovery Mode, use the Volume buttons to scroll to Wipe Data/Factory Reset, and use the power button to select it. Again, search the web for your phone’s model if you have trouble finding this option. Below are some ways that you can try to fix your dead phone. Pull the battery if your phone won’t charge A dead phone is a phone that you are unable to turn it on. The situation may get even worse: you can’t charge the phone.

Plug your iPhone in to your computer using a USB cable, and open Finder (iTunes if you're using Windows or an older version of macOS). Hopefully, the phone icon will show up in the toolbar along the top—if not, perform the hard reset steps listed above while the device is plugged in to put it in Recovery Mode. In the following content, we will walk you through the detailed steps to recover data from dead phone with MiniTool Mobile Recovery for Android.

Backup Your iPhone

Most times, the official service provider may help you repair your dead Android phone for free if the problem wasn’t caused artificially or through mishandling. When your device is completely drained, and after charging it, nothing happens or is unresponsive, just wait patiently. Better to wait for a longer time. If your device uses a lithium-ion battery, it will surely take time to charge it if it drains all the way to zero. So try charging it for a couple of hours and see if it turned on and charged. Method 4. FoneLab Borken Android Data Extraction There can be various reasons why your Android phone died and won’t turn on. However, it can be grouped into two categories: hardware damage, and software malfunctions. Inconsiderate of why your Android phone is dead, the fixes below will help you revive it. For most software issues, you can fix them on your own. But hardware problems may require technical assistance from a certified repairer. Part 1: How to fix a dead phone that won’t turn on. If you notice the pins inside the port are bent or broken, the best thing to do is take it to the service center. Trying to fix it yourself may do more harm than good.

On the iPhone, this is called DFU mode. You’ll need to plug your phone into your computer, open iTunes/Finder, and enter a slightly more complex series of button presses. It varies from phone to phone, so search for your specific model iPhone to see what you need to do. Ideally, once you do that, iTunes/Finder should prompt you to restore the iPhone.Additionally, this software can also show you the existing files on the device. That is, it can fully meet your need to recover data from dead phone by accessing internal memory dead phone to extract its data. iPhone 7 Series: Press and hold the Volume Down and the Power button simultaneously, then release when your iPhone is turned on. The USB debugging of your Android phone should also be enabled. Meantime, you have made the phone trust the computer you are going to use. Then, this software can identify the device successfully. iPhone 8 or newer: Press and release the volume up button, then press and release the volume down button, then press and hold the side button. Let go of the side button when the Apple logo appears on the display.

It will be a waste of money if you plan to buy a new mobile device when experiencing your phone is dead and won’t switch on or charge problem. That is why we listed 3 methods that you can try to resolve this type of error on your device, read and select the most appropriate technique for your problem. Method 1. Reboot Phone Plug-in any other peripherals to the adapter’s USB port, if needed. You can also connect a USB flash drive if you’d like to offload your files to it.NatWest, Royal Bank of Scotland (RBS) and Ulster Bank, which are all part of the NatWest Group, will now shut at least 172 of their bank branches in 2023 and 2024. After making sure that the charger isn’t the issue, this should be the logical next step. Sometimes, the battery gets completely depleted. When a phone is kept without charge for a long time the battery gets completely depleted. So, keeping the phone plugged in for a couple hours may fix the issue. When your Android or iPhone doesn’t turn on or charge, the first method that you can try is to reboot it. Rebooting a device helps it fix some issues on your phone. Also, it will close all active sessions on your device and restart it. Here’s how you can reboot your phone.