Ryobi 18-Volt One+ Cordless Bolt Cutters (Tool Only)

Product Information

The cutters feature center-cut jaws and compound hinges for added leverage. We tested them on cattle panels, baling wire, and 3/16-inch all thread. The Tekton 3400 cutters made it through all three types of metal, but we had to exert a lot of pressure to cut through the all thread. That type of pressure would have led to sore hands with some models, but the cushioning on the Tekton grips saved us from serious hand fatigue.

Periodically sharpen the blade and clean it using soapy water and a brush. Dry it with a soft rag to prevent the metal from oxidizing. Sharpen bolt cutters by clamping them in a vice and using a file or an angle grinder to file the edge. FAQsWe tested these bolt cutters on baling wire, cattle panels, and 3/16-inch all thread. It was easy to cut through the wire and panels, but we had to apply more force to sever the all thread (though not as much as with other 18-inch models we tested). We attribute the increased cutting power to the cutter’s hinge technology, which H.K. Porter calls “PowerPivot.” Bring on the muscle! The Pittsburgh 36-inch bolt cutters were the longest model we tested, and the extra length added up to extra leverage. We used this bolt cutter to cut through a variety of metal, including cattle panels, baling wire, fencing, 3/16-inch all thread (threaded bolt rod), and ⅜-inch rebar. These H.K. Porter bolt cutters are classified as “center cut,” meaning both sides of the blades are sharpened to a center point. This is one of the most common styles of cutters, and we didn’t have any problems cutting through the cattle panels, baling wire, or all thread. It took a little more squeezing power with these 24-inch cutters to get through the rebar, but we made it.

Do not use cushioned levers when working with electrical wiring as they are not insulated and do not offer a sufficient level of protection Featuring an upgraded gripping zone, the powerful jaws allow for easy gripping, prising apart chain links, and pulling of nails. For its size, we felt the WorkPro cutter was pretty effective. We expected to exert a lot more power, but the lever-fulcrum hinges (a compound hinge) cut through several metal items, including baling wire and cattle panels, with only a moderate amount of exertion. The blades are center cut, and the manufacturer says they’re made from chrome-molybdenum steel. Whatever they contain, they’re rugged and durable. On a whim, we tried to cut 3/16-inch all thread. It didn’t work, but our effort didn’t chip or bend the blades.This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. Strong tubular ergonomic bi-material handles have red/blue anti-slip grips that give you greater control during challenging tasks. As this cutter has a compact design, it performs well in a confined space and is ideal for everyday carry. Since users must apply a significant amount of force when using bolt cutters, the bolt cutters must have comfortable and durable handles to protect users’ hands and extend the tool’s life. Most bolt cutter handles consist of steel tubes that resist bending and feature padded grips to maximize comfort and control. There are different types of cutting blades for bolt cutters, including angle cut, center cut, shear cut, and clipper cut blades. Bolt cutters are usually available in 12, 14, 18, 24, 30, 36 and 42 inches (30.5, 35.6, 46, 61, 76, 91.4 and 107cm) in length. The length is measured from the tip of the jaw to the end of the handle. Routine maintenance includes lubricating the joint with an oil such as WD-40 to keep it clean and functioning smoothly. To lubricate, spray the joint and allow the solvent to soak in.