There’s no rocket science or tricks of the trade involved, at the basic level it is just a further decontamination of your paint. IPA (Isoproponal Alchohol) is a very effective cleaner of glass, PVC, ABS and perspex, stencils, etc. The mark is protected and can only be used by members of Made in Britain that meet the criteria we set to ensure the member is a British manufacturer. Having used IPA at work I already knew that it is excellent for cleaning electronic circuit boards because it leaves no residue. IPA (Isopropanol) General Purpose Alcohol Cleaner is a popular solution for the industrial or commercial cleaning of fibre optics, CDs, DVDs, tape heads.

Bilt Hamber Cleanser Fluid is a panel wipe that will remove all remnants of polish and waxy residue and oily or greasy road films. Some printers may have specific cleaning instructions, especially for delicate parts like printheads or sensitive sensors. In the process of assembling, reworking or repairing printed circuit boards (PCB) for electronic devices, the discussion inevitably turns to whether or not to clean the PCB. The FDA has issued a warning about methanol contamination in over 75 different hand sanitizers on the market. Compared to alternative solvents isopropanol alcohol is relatively non-toxic as a result it is used widely as a cleaning fluid, disinfectant, Fuel Additive, solvent and for its Pharmaceutical and Medical Applications.In addition to cleaning, it chases out moisture, improving electrical contacts in areas such as spark plugs and other electrical components in cars, motorbikes and vans.

Used to disinfect medicinal objects, prevents the spread of disease, and is commonly used to kill germs on all surfaces. Our IPA effectively removes oils, dirt and dust from surfaces and is CTA’s recommended product for surface preparation before bonding begins. The 103 third parties who use cookies on this service do so for their purposes of displaying and measuring personalized ads, generating audience insights, and developing and improving products.Panel wipe, also known sometimes as panel prep, is traditionally a solution made up of distilled water and Isopropyl Alcohol. In the event of any safety concerns or for any other information about a product please carefully read any instructions provided on the label or packaging and contact the manufacturer. Apply the IPA to a cloth and wipe over the area that requires cleaning, the fluid will clean, degrease and then evaporate leaving you a prepared surface to apply your graphics. To use: 1) Remove existing cap, 2) replace with the 2" spigot cap, 3) make sure spigot is in the off position, 4) turn the carboy on its side so the spigot points down and check to make sure the spigot isn’t leaking. I'd recommend this bottle if you don't do 3D printing - as you will need lots, but this is absolutely perfect for low-quantity usage - like if you jsut want to clean circuit boards or whatever.