If you wish to return your bike to us please keep it in the box it arrived in and call us on 01772 644340 and we will arrange a collection. When attached to any Ribble e-bike the MAHLE range extender supplements the main battery, boosting the total battery capacity to a whopping 456Wh. This equates to an extra 70% of range, allowing you to extend your rides for longer and travel further in search of adventure. The extender works in two ways. Firstly, when connected to the e-bike system the first two amps of power are provided by the range extender. Meaning the main battery is discharged much more slowly. It also acts like a power bank and will actually charge the main battery when demand is at its lowest; while descending or above the 25km threshold when all assistance ceases.

The previous iWoc ONE controller was often hard to understand, with LED colors indicating a combination of battery life, connectivity, light options, and assist levels. While the LED colors still require some homework to understand their meaning (which we’ll get into), the big difference is the LED bar that shows battery life. Is there more of a white light showing? Then there’s more battery. And if your battery is low, then the light bar will be dim. Delivery timescales are esimates in working days; Public Holidays, Saturday's and Sunday's are NOT classed as working days. So if there is anything going on in parallel, then I think there must be electronics managing this. Both batteries connecting to separate parts in the electronics and the electronics managing the current flow from both batteries to the motor.The charger is compatible with Gain F, Gain M and Gain D models from 2018. The external charger is not compatible with the eMX24 model.

The new Range Extender from ebikemotion is one of the most interesting accessories for the X35 propulsion system. It's 208Wh capacity complements the 242Wh of the main inner battery for a 450Wh total capacity, extending the range up to 70%Controlling assist doesn’t only need to happen through the HMI controller. MAHLE have also designed a set of optional e-shifters. These little shift buttons are wired, but can be placed almost anywhere. This allows riders to easily change assist levels from the handlebar. The HMI controller shows four colors to indicate the assist level. White for no assist, green for low assist, orange for medium assist, and then red for the highest, most aggressive assist. A yellow light indicates the lights are on or off. A blue light indicates a Bluetooth connection is being connected or disconnected. See a flashing orange light? That is a warning that functionality is limited; you can continue riding, though keep an eye out for what might be wrong through the MySmartBike app. From time to time carriers may deliver earlier or later, or on non working days however this is cannot be guaranteed nor should it be expected. The Orbea E-Bike Range Extender is compatible with Gain F, Gain M and Gain D models from 2018 and newer, and Optima E models from 2019. It mounts on the saddle tube and diagonal tube, respectively. The external charger is NOT compatible with the eMX24 model. We’ve had great success with the MAHLE X35 drive unit. Not only is it one of the most common electric bike systems in lightweight road and gravel electric bikes, but it was so low-profile in it's look that the only way one might realize an X35 bike was electric was by lifting it up. The new MAHLE X20 system - shown here on a BMC Roadmachine AMP TWO - offers up plenty of improvements that make the bike a noticeable step forward.