CDs are just data stored inside a piece of plastic as zeros and ones, read by a laser which then transduces the data into audio. In other words, the Crosley turntable itself is not doing any damage. It is the cheap needles they use for their low-priced products. Store your turntable properly: To prevent damage to your Crosley turntable needle, it’s important to store your turntable properly when not in use. Keep it in a cool, dry place away from direct sunlight and dust. So, let’s take a look at the finest needles the market has to offer! Are record player needles universal?

Replacing Crosley CR704 Needle - iFixit Repair Guide Replacing Crosley CR704 Needle - iFixit Repair Guide

Cleaning your record should always be your first task. It is the easiest fix and something you should be doing anyway, so it makes sense to start here. If it doesn’t fix the skipping, move on to other measures, like rebalancing the tonearm.If you’ve already disassembled the player during your inspection, take this chance to wipe the internal components with a microfiber cloth.

Crosley Radio: Amplify Your Style Crosley Radio: Amplify Your Style

With a flathead screwdriver, remove the clip that holds the platter onto the assembly with a flathead screwdriver. You’ll find the clip on the middle of the platter. Crosley record players now come with built-in speakers. (Older models that predate the 1980s, however, may not. However, if you find one of these, let us know! At present, it is believed that earlier models of the Crosley record player have all vanished with time.) While these speakers are of an acceptable quality, they certainly are not high-dollar produces. Some users recommend you buy additional external speakers should you want to listen to your Crosley. After all, poor quality speakers will not be on par with high-end ones no matter how new your record player’s needle is. If the weight is set too high, the needle presses into the grooves of your record with too much intensity and distorts your music. This can also damage your record over time.Stop the record from spinning and leave it as is for 24 hours, so that the wood glue dries completely. Once it’s bone-dry, remove the layer of wood glue, starting at the outer edge. Try to remove it in one go.