A PCP like the BSA Ultra XL is the simplest to deal with, as it features an air stripper that just unscrews. One huge advantage of the pull-through is the fact that, just like with felt cleaning pellets, you are cleaning in the same direction that the pellet travels, depositing any muck and detritus out at the muzzle end rather than the breech. If you’re going to put the gun in storage for a while – maybe you put your gun away over the winter – make sure there’s a light film of oil in the bore, which will help protect the metal from any moisture that’s trapped in your gun cabinet or bag.

How to clean your airgun - Airgun Magazine How to clean your airgun - Airgun Magazine

But the leading will keep getting thicker – and eventually, instead of aiding consistency and accuracy, it will work against it. Our kit also includes 1 x 120ml Power Airgun oil Pump Spray, which contains exactly the same amount of active ingredient as the 200ml Aerosol version.One of the big no-nos of using a brush is to reverse direction when it’s still in the bore, because although the phosphor bronze bristles are softer than steel, they can still scratch it. Afterwards, the dirty snake can be washed by hand or put in a mesh delicates bag and run through a washing machine ready to be used again. Patches put through bores that I thought were perfectly clean came out coated in a filthy mixture of black and brown. These pellets are meant to be used regularly, and some people use them every time they shoot their guns.

Airgun Cleaning Kit Napier Pull Through - A. Branthwaite Airgun Cleaning Kit Napier Pull Through - A. Branthwaite

With the Napier Pull through tool and easy-to-follow instructions, you'll have everything you need to get your air rifle clean and functioning at its best. If you did unscrew anything from the muzzle end, now is a good time to lube the threads with a good-quality moly grease such as Bisley’s. Repeatedly plugging away, hoping the pull-through will eventually find the bore, isn’t a great idea either.

I decided to send my Hw110 to Branthwaites for full strip and service after hearing of them numerous times at my local range. Adjustable and “drooper” scope mounts are also available to allow proper mounting of scopes on airguns that include barrel droop as part of their design. From a recognised air-rifle kit brand like Napier of London, you can be sure of only the highest quality. This will help keep your barrel in tip-top condition, ensuring top-notch accuracy every time you shoot. Some guns, like the Zbroia Kozak, feature a shroud that does not offer direct access to the barrel itself.

clean your PCP gun barrel - Airgun Magazine How to clean your PCP gun barrel - Airgun Magazine

The big advantage of a pull-through is the fact that you’re cleaning the barrel in the direction of travel of the pellet.When you pull the patches through, be careful to pull centrally to the bore, otherwise you run the risk of damaging the crown. The solution is to ensure the brush is pushed all the way through the bore before pulling it back – or use a nylon brush which doesn’t cause a problem when the bristles are folded back on themselves. I’m using the Napier Power Pull Through Kit, which includes all the cleaning products you’ll need, but there are plenty of alternatives on the market. After a few passes, I finished off the process with several dry patches to clean the bore of any residual polish.