Bevel Capacity: This determines the saw’s ability to make angled cuts, which reduces the maximum cut depth compared to straight 90-degree cuts. At a 90-degree angle, the 14″ (355.6mm) Grizzly G0772 can cut up to 4″ (101.6mm) deep. When you change the angle of cut to 45 degrees, the depth of cut drops to 2-¾” (69.85mm). With the 12″ (304.8mm) Grizzly G0605X1, the maximum depth of cut at a 90-degree angle is 4″ (101.6mm), too, and the maximum depth of cut at 45 degrees is 2-¾” (69.85mm).

For professional applications, there’s the GTS 10 J Professional table saw. This one has a maximum cutting depth of 3-⅛″ (79.4mm) at a 90-degree cut angle and of up to 2-½″ (63.5mm) for a 45-degree angle. Dewalt Table Saw Cut Depth Calculating the theoretical depth of a circular saw cut involves considering various factors contributing to the cutting depth variation. The blade’s radius is a crucial element in this calculation. A larger blade radius results in a deeper cut, while a smaller radius yields a shallower cut. The motor on a circular saw is liable to be placed under extreme stress if you’re cutting long pieces of hard timber. So look out for safety features built into the motor, such as protection against burning the motor out, fans to keep the motor cool or advanced braking systems that immediately kill the motor and stop the blade in an emergency. One issue is that the blade is weightier, and the expanded surface area offers more obstruction and will over-burden the motor. This is undoubtedly not something beneficial for its service life, just as power consumption. Last Words With the blade to the right of the handle, it’s a little easier for right-handers, but, thanks to the well-positioned two-way release switch, left-handers will have little problem using it.When making deep cuts with a circular saw, precision and safety are paramount. Here are focused tips to help you achieve the maximum cut depth effectively: There are two common blade diameters for mini circular saws – 85mm and 115mm . In comparison, a standard circular saw blade size ranges from 165-190mm. The cutting depth on mini circular saws is therefore reduced – 115mm versions can cut down to around 40mm at 90° and the more compact 85mm versions to around 25mm , compared to a standard saw’s cutting depth of around 65mm. Read on for details on the key determinants of cut depth in table saws and a review of all popular saws’ cut depths at different angles.

The depth of cut achievable from your cordless circular saw varies from manufacturer to manufacturer, so look out for the maximum cutting depth at 0°. That’s how deep you’ll be able to cut when the saw isn’t being used to cut a bevel, which is achievable if the saw has an adjustable base plate.

Shop local

In like manner, a standard circular saw, which mounts a 7 1/4-inch blade, can give a depth of 2 1/2 inch most extreme. As an amateur user, all lean toward this blade size for my task. This standard size of circular saw gives me more choices for brands and sorts of the blade. 6 1/2 Circular Saw Cutting Depth That’s why when shopping for a table saw; you’ll notice that each is labeled according to the diameter of the blade it can accommodate. Most of the saws can handle a 10-inch (254mm) blade, but a handful can accommodate a 12-inch (304.8mm) blade. 3.5” (88.9mm) is the maximum 10-inch (254mm) table saw cut depth, while a 12-inch (304.8mm) option can cut up to 4 inches (101.6mm). Circular Saw Blade Cutting Depth for 0 – 90 Degree How Much Depth Can a 5 1/2″ Circular Saw Blade Cut? Additionally, the number of teeth on the blade can influence the cutting depth, with blades having fewer teeth generally cutting deeper.

the tool is not an Air Compressor/ Air Tool, a Battery/ Charger, an Accessory, or a Petrol or Production Tool If there is a blade then it will be easy to find the exact size. However sometimes that has worn off. That makes it slightly harder to figure out.

The most common material that you’re going to cut for home DIY projects will be sheet materials like plywood or MDF. And it’s likely you’ll want to cut straight lines, so a mini or compact circular saw is the ideal step up from a handsaw. The better models come with attachable guides for cutting straight lines and even lasers that light up the way. Corded or Battery Power? The heavy-duty R4513 has a maximum depth of cut of 3-½” (88.9mm) at 90 degrees and a 2-½” (63.5mm) possible depth of cut at a 45 degrees angle. The compact R45171, on the other hand, has a maximum depth of 3.375″ (85.725mm) for a 90-degree cut and 2.5″ (63.5mm) for a 45-degree one. It has a similar cutting capacity as the 15 Amp R4518 for both cutting angles. The actual size of a 4″ x 4″ lumber is 3 ½″ x 3 ½-inches. If you want to cut through a 4×4 in a single pass, use a 10 ¼ inch circular saw. Although this saw is heavy, it can be very handy in situations such as cutting the top of fence posts that are already installed. Largest Circular Saw Key specs – Weight: 3.8kg; Blade diameter: 190mm; Cutting depth at 90 degrees: 66mm; Cutting depth at 45 degrees: 46mm; No-load speed: 5,200rpm Not far behind the 7 ¼″ circular blade is the 6 ½″ saw, at least in terms of popularity. While the blade itself is smaller, it also makes the circular saw lighter and somewhat easier to handle in comparison to larger blades.

If you’re working in a confined space, a mini circular saw can be indispensable and Einhell’s TC-CS is a great example. At just 2kg, it’s light and, with a handle roughly the same size as a grinder, it’s easy to hold. Generally, the maximum cut depth of table saws varies by manufacturer and product design. For most table saws, 4″(101.6mm) is just about the maximum depth for a 90-degree cut. For a 45-degree angle of cut, the maximum depth is 2-¾” (69.85mm).inch circular saw offers a slightly deeper cut, with a maximum depth of 2 1/8 inches at 90 degrees. At a 45-degree angle, the cut depth is 1 7/8 inches. If the tool is faulty within 30 days of buying it, we will arrange for its collection at no cost to you and supply a replacement. This is the most popular of the larger types of circular saw blades. These are usually worm drive circular saws since they offer more of the power and torque. However, it is also heavier and less nimble compared to the 7 ¼″. A 2×4 lumber piece actually measures 1.5 inches by 3.5 inches. To cut a 2×4, you can use a 6 1/2″ circular saw, which typically has a maximum depth of cut of about 2 1/8″ at 90 degrees, allowing you to cut through the 2×4 in a single pass. What is the depth of cut for a circular saw for a 4×4? While one of these table saws has a 2″ (50mm) larger blade, they both have similar maximum depths of cut and would equally suit anyone looking for a table saw 100mm (3.9”) cut depth, sure, the saw with the larger blade might perform better in some other ways, but as far as the cut depth is concerned, a larger blade doesn’t always mean better. Final Thoughts