More paint in the can – Resulting in a higher coverage. Each aerosol covers 2.5m2 which equals up to twice the amount of standard aerosols. You will achieve a higher film build without drips or runs, in one go, plus harness twice the opacity of cheaper paint sprays (saving a cross layer). Normal coverage in one pass. Higher quality pigments for a longer sheen, depending on your finish, and colour retention. Temperature of air, substrate and coating material between 5° and 35°C and relative humidity below 85%. The substrate temperature must be at least 3°C above dew point. Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application. To ensure fair pricing, we split colours into ‘Price Bands’ to group together similar priced colours. If you wish to search for the cheapest tinted colours, always select Price Band 1.

surface afterwards with water. If wax or oil has previously been usedon the item, clean the surface thoroughly with white spirit. If paintingover a hard or glossy or previously painted surface abrade the surfacebefore application.Application: Stir thoroughly before use. The product may be appliedby brush or roller. If applying by brush, apply evenly, following the grain To find Ready Mixed colours, search "ready mixed" or select the Ready Mixed 'colour chart'. To see Tinted colours select a colour chart such as RAL, BS, NCS, etc. or search for a colour/hue to see available or related options.

H222 Extremely flammable aerosol.H229 Pressurised container: may burst if heated.H319 Causes serious eye irritation.H336 May cause drowsiness or dizziness.H373 May cause damage to organs through prolonged or repeated exposure.H412 Harmful to aquatic life with long lasting effects. Coverage: Up to 14m2 / litre. Coverage may vary depending uponmethod and rate of application and porosity of surface.Also – You can apply this to a multitude of other surfaces such as Metal, Wood, Plastic, Ceramic and even Glass with the correct preparation. Clean Up: Remove as much product as possible from applicationequipment before washing with water. Do not empty into drains orwater courses. Some local authorities have special facilities for thedisposal of waste coatings. volume RUST-OLEUM Thinner 7301. Gravity cup and pressure cup. Tip size: 1.0 - 1.5 mm. Atomising pressure: 2 - 4 bar. Some food items may stainthe product, remove any spills immediately to stop this or minimize theeffect. Not suitable for use on a bath or any surface regularly immersedin water. Temperature at time of application and during drying should begreater than 10°C.

Rust-Oleum CombiColor Original is a primer and topcoat in one for interior and exterior use on bare metal, manually de-rusted metal, surfaces primed with Rust-Oleum 3369/3380 CombiPrimer Anti-Corrosion, or previously painted surfaces. Rust-Oleum CombiColor has excellent opacity (hiding power) and sag resistance, leaving no brush or roller strokes, and provides good drying properties even at low temperatures. For reasons of hygiene and safety, personal grooming products, cosmetics or items of intimate clothing cannot be returned. Rust-Oleum CombiColor is a one coat maintenance system for metal, providing superior metal protection, even when applied direct to rust. It remains flexible and does not become brittle or flake with movement. Rust-Oleum CombiColor is intended for brush and roller application and can also be applied by air spray. Make sure that all surfaces are free from dirt, grease, oil, loose rust and all other surface contaminants for the best results. It really is the only way you should handle spray painting. Renovate and transform your kitchen with Rust-Oleum KitchenCupboard Paint. An ultra durable, scrubbable and water resistant,flat matt finish for kitchen cupboards.For more aggresive environments, prepare surfaces with Rust-Oleum 3369/3380 CombiPrimer Anti-Corrosion In addition – Surface preparation: For best results, ensure surface is clean, dry & free from loose paint, mould & mildew, wax or oil. If wax has been used, clean the surface thoroughly with white spirit. We recommend that bare wood should be sanded before painting. Hard glossy surfaces should be abraded before painting. Cover surrounding areas to protect from spray mist. Preparation: Ensure surface is clean, dry and free from contamination.Use sugar soap equivalent to remove all traces of contamination, rinse For galvanised steel, aluminium, etc such as garage doors, etc, we recommend spot priming these areas first with Rust-Oleum 3302 CombiPrimer Adhesion