Now you need to rinse the product away. You can do this with a hosepipe or a power washer, such as Kershar. You can also use a brush to ensure the product is thoroughly washed away. It’s important to note that if you do use a power washer, try and use it on a gentle setting. If it’s applied to vigorously, the pressurised blast could damage your driveway. Once the area has been cleaned and is dry, we advise the application of pH Neutral Surface Cleaner - Baticlean CR. This will clean any dirt or staining that may have been missed during the initial treatment and does not require rinsing so can therefore help to keep the surface clean for longer.

Read the instructions: Always read the instructions provided by the manufacturer before applying any chemical treatment. Follow the recommended dosage and application methods to achieve the best results. To maintain a moss-free driveway and prevent future moss growth, it is important to follow these tips: The surface, by its very nature, is rough. Moisture retention is therefore very high, which encourages moss and lichen spores to grow. Not only does the surface retain moisture but the uneven surface provides excellent protection for the moss to grow. If you look closely at the surface of a tarmac driveway you will see small pits. These provide perfect 'hidden' areas for the moss spores to slowly grow as they hold moisture and protect the growing plant from car tyres and shoes until it is big enough to look after itself. This is when we begin to see that it is causing a problem. During winter months, be cautious of snow and ice removal techniques. Using a scraper or shovel can potentially damage the resin surface. Instead, opt for snow melting products that are safe for the driveway. If moss is also a problem on your lawn, DO NOT use the moss killers from this review on it. Read our How to remove moss from your lawn article and our Top 5 Best Moss Killer For Lawns – Soluble & Granular review.With the Patio Magic ready to use spray, everything is already set up for you, leaving the only task of actually spraying the moss killer onto the affected surface. This solution comes pre-mixed so there’s no measuring to worry about, and attached onto the 5 litre bottle is a small, battery operated sprayer (four Duracell AA batteries are included). This really is a handy product for people on the go who don’t have time, or just simply don’t want to spend time, going through the whole process of measuring, mixing, pouring into a sprayer, etc. On top of this, the granulated formula contains iron which kills off moss, stopping it from taking over whilst the weather forces you to spend more time inside. It can be applied every six weeks, with this 20 kg bag containing enough product to cover an area of 571 m².

You can make an effective moss killer at home with some common household items, like water and bleach, water and washing up liquid or vinegar. We tested this on some old wooden garden furniture whose legs had been colonised by green moss recently while it was stored in a shaded corner of a garden. For the first couple of days, there wasn’t any visible change and I was ready to write it off as an overrated product, but then on the third day we started to see something, and it just got better and better, day by day, until the moss was completely gone. We also tested it on some wooden fencing and this time the results were obvious on the second day. I have to say I was impressed. Leave the baking soda for a few hours to absorb the moisture from the moss, and either pull out the dead plants or scrub the area with a stiff brush to clean your patio or path. Boiling Water Firstly, regular sweeping and cleaning of the driveway is necessary. This helps to remove any debris and dirt that may act as a breeding ground for moss. Maintain a sweeping motion while jet washing the driveway. Start from one end and work your way to the other, making sure to cover the entire surface evenly. This will help ensure that all moss, dirt, and weeds are properly removed. 5. Clean in SectionsSuccessfully spreading products over the lawn without the right tools can be a difficult task, especially when it’s important to get an even application. Whilst it’s true that buying a granule spreader can help make spreading moss killer easier, it does sometimes seem like a waste of money to buy a tool you might only use twice a year. Once you have successfully removed the moss from your driveway, it’s important to take steps to prevent it from regrowing. Here are some tips to help keep your driveway moss-free:

One of the easiest ways to remove moss from a resin driveway is to manually remove it. Simply take a stiff brush or broom and scrub the moss away. This method may require some physical effort, but it is a simple and cost-effective way to clean the surface. 2. Cleaning Solution Wearing a pair of safety gloves and some eye protection, apply the moss killer to the affected areas, following the manufacturer’s instructions on how much to use. Moss is a common issue that many homeowners notice on their driveways. It typically appears as green or brown patches along the surface, making the driveway look untidy and unkempt. Moss thrives in damp, shady areas and can grow on any surface that provides it with enough moisture and shade.

Privacy Policy

Treatment options depend on the method of application and the surface cleanliness required; do you just want to remove the moss, or do you want to clean and renovate the tarmac at the same time? After brushing your tarmac surface, spray the area with BATIFACE. This cleaner should be left on the surface for 30-45 minutes before being rinsed with either a hosepipe and brushed or, ideally, a small PRESSURE WASHER. The rinsing process is required to not only wash away the product but also to help remove any staining, debris and any dirt so generally cleaning the surface. This method is especially effective when surfaces become slippery during the winter months as the BATIFACE is strong enough to get deep into the surface, ensuring everything can be rinsed away. If moss growth persists or becomes a recurring problem, consult a professional for advice on ongoing maintenance. Depending on your jet washer model, choose the appropriate attachment for cleaning resin driveways. Some jet washers come with adjustable nozzles or different spray settings, allowing you to adjust the water pressure and coverage for more effective cleaning. 3. Start with Low Pressure

Mix the baking soda and water in a spray bottle and shake until the solution is well-mixed. Walk around, spraying any moss patches with your natural moss killer for lawns. You want to soak the moss, so apply enough cover it thoroughly. The product should wash away both the moss and any excess dirt, leaving you with a clean, moss-free tarmac driveway. However, it’s worth attempting repeated application, as moss roots are remarkably invasive. They can even cause damage to tarmac driveways, especially in the frosty winter months. Use an oxygen-based bleach rather than a chlorine-based one as it is better for the environment. Oxygen bleach will contain sodium percarbonate, which is plant-based and a mixture between sodium carbonate and hydrogen peroxide. When it interacts with water, it releases oxygen creating a powerful but environmentally safe bleach and stain remover. Depending on your situation and the severity of the moss growth, you may need to combine these methods. The most environmentally friendly way to remove any unwanted weeds and organic pests from your outdoor surfaces is to use boiling water to kill them at the root. Simply pour boiling water over the affected area, wait for a few minutes, then sweep the area with a stiff brush to uproot the unwanted weeds and plants. Bleach

Lawn Gold Lawn Fertilizer & Moss Remover is the best lawn moss killer if you want a chemical-free product with organically-based ingredients. It works to create an environment that will successfully deter moss, containingcalcium which is used to reduce soil acidity. Moss thrives in acidic ground, so combatting its growth by improving the composition of the soil is an excellent, long-term solution. When you begin jet washing your resin driveway, start with a low-pressure setting and gradually increase the pressure if needed. Using too much pressure from the beginning may damage the surface or cause the resin to become loose. 4. Use a Sweeping Motion Wear protective clothing: When handling chemical treatments, it’s essential to wear protective clothing such as gloves, goggles, and a long-sleeved shirt to protect yourself from any potential harm.