If you don’t have a colour preference, or hadn’t realised there were numerous options to choose from, the Mapei grout colour chart below can help you to visualise the different shades before you buy. For grouting floors and walls that are subject to high levels of traffic (airports, shopping centres, restaurants, bars, etc.). The colours available in this range are resistant to ultraviolet rays, too, so there’s also no concern about fading over time - and the Kerapoxy CQ also features coated quartz, making sure grout retains its original colour when cleaned. Mapei Ultracolor Plus creates water repellent grout joints that have excellent colour uniformity. All colours are resistant to UV rays and atmospheric agents.

This means, when choosing the best grout for your tiling project, you’ll need to consider the specific needs of the job. For example, interior decoration projects where you’re concerned with aesthetics alone will likely lead you to choose a different option than that of practical outdoor tile installations. If you are installing one of our hard-wearing outdoor tiles, you'll need a grout that’s fully equipped to handle exposure to increased moisture and dirt, as well as extreme temperature fluctuations between the seasons. The quantities are already in the correct proportions, therefore mistakes should not be made. Do not guess the quantities when mixing the two components. A wrong catalysis ratio could impair the hardening process. Therefore it has optimum resistance to abrasion, compression and flexural strength, even after freeze/thaw cycles, and therefore optimum durability. In addition, it has good resistance to acids with pH > 3. Speaking of grout colours, you’ll find our Mapei grouts come in a vibrant array of colours, helping you to find an option that suits your tiling project. Whether you want to colour match or contrast your tile grout against your chosen tiles, you’ll be spoilt for choice. You must be available to accept delivery on the date you have requested, failure to do so will result in paying for a re delivery charge.

Follow Us:

Mapei Kerapoxy Epoxy Tile Grout allows you to create floors, walls and worktops, etc. in compliance with the HACCP system and the requirements of EC Regulation No. 852/2004 regarding hygiene and foodstuffs. UniBond Ultra Force: these ready-mixed grouts make use of fibre technology for maximum durability, with top protection against moisture and mould to keep your grout looking its best for longer. Colour options include grey and navy blue, infused with glitter to bring sparkle to walls or floors tiled in porcelain, ceramic or natural stone Unglazed klinker tiles should be grouted with the same colour tone Kerapoxy. All other colours should be used only with glazed tiles. When removing already cured Kerapoxy from the joints, use a hot air industrial drier. Remove hardened Mapei Kerapoxy from the tiles with Mapei Pulicol 2000. After the final cleaning operation, if the surface still has traces of Mapei Ultracolor Plus due to incorrect application, it may be cleaned down with an acidic cleaner (e.g. Keranet), by following the relevant instructions, at least 24 hours after grouting the joints. Only use Keranet on surfaces which are resistant to acid, and never use it on marble or limestone material.

Sponge down the area: using clean water and a damp (not wet) sponge or sponge float, wipe down the tiles and grout lines to remove the remaining grout, ensuring the grout lines have a smooth, even finish. Acid-resistant bonding of tiles (used as an adhesive in compliance with class R2T specification according to EN 12004 standard). Mapei are industry-leading tile grout manufacturers with a focus on delivering high-quality products that are also easy to use, even if you’re a novice tiler. With a diverse range of tile grout options available to buy online, we have everything you need to complete your tiling project and ensure you’re left with a professional-looking finish. Why use tile grout?Mapei Kerapoxy Epoxy Tile Grout is a two-component acid-resistant epoxy grout for joints of at least 1mm in width. Can also be used as an adhesive.

Preparing the mix: While stirring, pour the Mapei Ultracolor Plus Grout powder into a clean, rust-free container containing 21-23% by weight of clean water. Mix the grout with a low-speed mixer to avoid air entrainment, until a smooth paste is obtained. Let the mix stand for 2-3 minutes, and stir again briefly before use. Use the mix within 20-25 minutes of its preparation. Mapei Kerapoxy Epoxy Tile Grout is a two-component, epoxy-resin based product with silica sand and special components, with excellent resistance to acids and excellent cleanability. This is a product with very low emission of volatile organic compounds and is classified Emicode EC1 R Plus by GEV when used for grouting. The following features are obtained when used correctly: Always carry out preliminary tests before grouting stone or ground porcelain with a porous or rough surface.In areas that may need added protection against stains and chemicals, such as countertops or high-traffic areas, we’d recommend investing in the Mapei Kerapoxy or Mapei Kerapoxy CQ grout. Both tile grouts provide exceptional resistance to acids and boast stress-free cleanability, meaning you can keep your grout lines looking clean and colourful with ease. Of course, with our Mapei grouts you aren’t limited to neutral hues, you can also use colourful shades in creative ways to make your tiles really pop out. From cool space blue and dreamy turquoise to sunny yellow and violet, embrace the beauty of bold grout colours to your heart’s content.

This is where tile grout comes into play, providing a hard and water-repelling barrier against dirt and moisture. Grouting is a key part of the tile installation process. Aesthetically, it provides a beautifully smooth result and adds the finishing touch to your tiling job. Practically, it means you can enjoy long-lasting tiles that perform as they should, rather than becoming damaged by dirt, debris and water over time. If you choose to skip the tile grouting process, it can impact the integrity of the tile adhesive, causing them to come loose and need replacing.When resistance to acids or, where extreme cleanliness or sterile conditions are required, use a suitable acid-resistant epoxy grout. Spread Mapei Kerapoxy with an appropriate grout float, making sure the joints are completely filled. Use the same float, but on edge, to remove excess grout.