All vehicle manufacturers made changes to their ATF specifications and the controls of their TCC to try to alleviate the problem. GM was first to market with Cadillac Allante's electronic-controlled transmission system, THM F-7, in 1987, followed by Chrysler and Toyota in 1988, and Ford in 1989. Mobil-1 LV ATF HP is composed of a Gas to liquids (GTL) Group 3+ Base oil and additives developed by Infineum needed for the proper operation of the 2015 and above GM 8L90 and 8L45 8-Speed rear wheel drive automatic transmission. This fluid had cold-weather performance problems, which led to the need for an improved fluid, the Type "A" fluid, in 1949.

ATF was chosen as PSF for the same reason it's also utilized as a manual transmission fluid; minimizes expenditure and simplifies production ops all while working well enough.The original Dexron (B) fluid better retained the initial properties of the previous Type "A" Suffix "A" fluid (Several thousand cycles compared to 1000 cycles). Dexron-II(C) was composed of a more stable, less reactive, hydrocracked Group 2 base oil plus a revised additive package with corrosion and rust inhibitors such as jojoba oil; however, the additive package caused problems with corrosion-prone solder in a relatively small number of GM's transmission fluid coolers. Original equipment manufacturers names and part numbers are quoted for reference only and not intended to infer that our replacement parts are sold as original parts. If the item comes direct from a manufacturer, it may be delivered in non-retail packaging, such as a plain or unprinted box or plastic bag. Also in 1959, Toyota released their Toyoglide 2-speed transmission, which used the GM Type "A" suffix "A" fluid.

To be licensed, the product must have a license number that begins with the letters B through J and include a "Dexron Approved" sticker on its container. It is accepted by you that KTM Direct has no control over additional charges in relation to customs clearance.As shown on the photograph of the rear panel, the 2013 Dexron HP is composed of a group 4 polyalphaolefin (PAO) base oil and additives provided by the Afton Chemical Corporation. litres of automatic transmission fluid, this is the recommended UK/Europe specification of Dextron 3 type oil. cSt for Dexron III), but the allowed viscosity loss from shearing of the ATF during use is lower for Dexron VI, resulting in the same lowest allowed final viscosity for both Dexron III and VI (5. As far as I am aware, LR recommends MTF94 for the R380, which is what I used on last change for main gearbox.

In 2005, Ford released the Mercon Low Viscosity (LV) fluid and GM released the Dexron VI specification. My owners handbook recommended Pentosin CHF202 it is blue / green in colour it does not mix with any other fluid, but I have not seen a XK with this in the power steering so I would check the colour of oil that is in the reservoir before topping up.Most purchases from business sellers are protected by the Consumer Contract Regulations 2013 which give you the right to cancel the purchase within 14 days after the day you receive the item. This fluid was composed of a Group 1 base oil and additives to reduce oxidation, foaming, rust, corrosion, varnish, and sludge buildup. There was change of LR specification - from Dextron 2 to MTF94 - it is in RAVE - Technical bulletin 0007 from 29. Please remember it can take some time for your bank or credit card company to process and post the refund too.