And this is the view from the back - both have 6 pins, but on the one, two are not useable as they are cropped short - circled in red. To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average.

Out of my 3 original switches 1 is good, 1 doesn't work at all, the 3rd works but the bracket has lost its shape and so it wont sit tight in the hole and if you try to add some more "pull" via the wires it just pulls it apart.Read more about the condition New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging is applicable). Here's the drawing, you're not exactly right, the passenger switch (H50) does NOT receive ALL the power from the battery, only the positive comes in directly; the earth (for the motor) comes from the driver's switch (H51). Also if someone would be able to give me an explanation into how the driver's side switch comes into the equation that would also be great, as I have no idea how that comes into the circuit. To be honest having the switches lighting up whenever the ignition is on isn't a problem so i might just do that as it is easiest.

Below is a picture of the 2 switches I have - they are very slightly different looking - one is marked as made in France, the other has no markings. So what cuts the power if your finger is still on the button as the end of the window travel, the motors u have themselves.

Doing it this way means that you can easily connect a window roll up module for an alarm: disconnect one wire from the window motor and connect to 12v. If you only use it 10 times in the car's life then add a few bunches of 50 to clean the contacts, you're not really scratching the surface (except, of course, the surface of the tarnish on the contacts! ECU, the ecu is there to cut the power when the glass reaches the end of it's travel if you still had your finger on the button then there would be a bit of damage within the door, also the disco has a single touch descending drivers door window the ecu looks after that also. I presumed originally that it must just be a faulty switch, so purchased a new one, however I'm still having the issue. I fitted a couple of these Britpart window kits and used Land Rover switches (YUF101521LNF) with them.